Duwan Environmental WQ10-10-1 Submersible Pump, with Installation and Commissioning Included

50mm outlet diameter

With 10-meter waterproof sealed cable

Through 25mm particles

Motor Power: 1 kW

Product Model

    50WQ10 - 10 -1

50 --- Discharge Diameter (mm)

     WQ Submersible Clog-Proof Sewage Pump

11 --- Rated Flow (m³/h)

10 --- Rated Head (m)

1 --- Motor Power Rating (KW)

Jiangsu Du'an Environmental Protection Submersible Pump, Sludge Pump Technical Description

The configuration and application of drainage and sludge pumps are as follows:

Submersible sewage pump installed in the production wastewater recovery pond for clarified liquid recovery and pressurization.

Submersible sludge pumps are installed in the production wastewater recovery pond for pumping out the bottom sludge and water.

Duane Environmental Submersible Sewage Pump Supply Range:

Duwan Environmental's submersible pumps offer both local manual and remote control capabilities, and should include but not be limited to the following scope:

· Fully assembled submersible sewage pump (pump casing, impeller, matching motor, seals, etc.)

· Lifting Devices (Guides, Supports, Chains, etc.)

· Coupling devices and accessories

· Required for each sewage pump10m Underwater cables, connectors, elbows, fasteners, cable junction boxes.

Low-Level Float Switch

· Local Control Box (includes)PLC Signal Interface

·All connecting accessories, bolts, and other fasteners

Random spare parts and tools

Jiangsu Du'an Environmental ProtectionWhen testing the submersible sewage pump supplied, the mechanical seal provided with the contracted equipment should be used.

The bidder shall notify the buyer at least twenty days in advance after confirming the test date for any inspections or tests that require the buyer's presence or observation.UserTo ensure the buyer can participate in a timely manner. Results of trials not witnessed or observed should be recorded and submitted for the buyer's approval.

In addition to the specified witnessing tests, at any point during the manufacturing process, the user may inspect the ordered equipment materials, manufacturing, and packaging at the manufacturing facility. During the inspection, the manufacturer shall be responsible for providing the buyer with all necessary drawings and documentation for processing and assembly, inspection tools and equipment, as well as relevant standards and specifications for equipment manufacturing and inspection, to facilitate the buyer's inspection activities.

Upon completion of the inspection, all drawings, inspection tools, and the used standards and specifications shall be returned to the manufacturer.

Painting on the equipment surface is not permitted until all inspection work is completed.

Original records of inspections and tests shall be sent from the equipment within 30 days.File and store.

Submersible Pump Factory Information Sheet

Submersible污水泵Form, model, specifications,外形 dimensions, technical performance, and relevant parameters of the equipment

Basic bolt layout detail and civil load

Overall layout of the pump assembly

Pump assembly structural drawing

Detailed technical specifications

Parts Material and Protective Coating Description

Equipment's exterior dimensions and space requirements for installation and maintenance operations.

Electrical schematic diagrams and terminal wiring diagrams

Control Schematic

UtilizeInstruction Manual or Equipment List

Submersible Pump Technical Data Sheet

Product List (including name, quantity, specifications, performance parameters, material, origin)

Installation, operation, and maintenance manuals for equipmentMaintenance and Care Guide