Accelerate the pellets to generate kinetic energy, spray against the inner wall of the steel cylinder. When the cylinder is positioned in the spray chamber, the spray automatically extends into each bottle. It moves up and down within the cavity, completing the cleaning of the inner wall. It is a type commonly used in the gas cylinder industry. It has the following advantages: 1. It removes oxidation scales and adherents produced during the stretching manufacturing process from small bottle interiors, resulting in a clean metallic color after treatment. The cleanliness of the inner surface of the workpiece reaches SA2.0-2.5 (GB8923-88).

Cautionary Notes for Shot Blasting of Stainless Steel:

1. Wear protective gear before sandblasting with stainless steel; biceps and arms must be covered. At least two people must be present during work.

2. Regulate the gas storage tanks, pressure gauges, and safety valves regularly. Release dust from the gas storage tanks every two weeks, and inspect the filters in the sand tanks monthly.

3. Check if the ventilation duct and sandblasting machine door are sealed. For work minutes, liquid sandblasting machines must operate with ventilation and dust removal equipment. When the ventilation and dust removal equipment fails, the sandblasting machine is prohibited from operating.

4. Gradually open the compressed air valve, and the pressure must not exceed 0.8 MPa.

5. The grit size should match the job requirements, typically ranging from 10 to 20 mesh. The principle of a liquid sandblasting machine is that the sand should remain dry.

6. Keep unauthorized personnel away from the sandblasting machine during operation. When cleaning or adjusting the moving parts, the liquid sandblasting machine structure should be shut down.

7. Do not use compressed air to blow off dust from your body or joke around during stainless steel shot blasting.

After work, the ventilation and dust removal equipment should continue to operate for five minutes before being turned off to expel indoor dust and maintain cleanliness of the site.

9. In the event of personal or equipment accidents, the scene should be preserved.

As the small car in the shot-blasting room completes the shot-blasting operation and leaves the room, the waiting area stopper automatically releases, allowing the car to enter the shot-blasting phase; simultaneously, the next car is waiting. After the car's workpiece is cleaned (strengthened) it automatically runs to the waiting area to await the next batch. This process repeats continuously. The working principle of the road machine surface shot-blasting machine: The shot-blasting machine in the Wu Shi high-speed road surface shot-blasting machine operates by mechanically projecting shot material (steel shot or sand) at a high speed and specific angle onto the working surface, causing the shot to impact the surface. A liquid sandblasting machine brand is then used, and the shot and debris are separately collected within the machine through the airflow cleaning action of the matching dust collector, allowing the shot to be reused.




Principle of Liquid Sandblasting Machine - Liquid Sandblasting Machine - Anping Machinery provided by Kunshan Anping Machinery Equipment Co., Ltd. Kunshan Anping Machinery Equipment Co., Ltd. has dedicated much enthusiasm and passion to the field of abrasive tools and materials. Anping Machinery always centers on customers and creates value for them, winning the market with quality and service. We sincerely hope to cooperate with all sectors of society to achieve success and brilliance together. For related business inquiries, please contact Xu Chaoqi.