EPS decorative strips are a new type of exterior wall decorative trim and components, more suitable for installation. On exterior walls insulated with EPS or XPS, they can reflect the classic and elegant European decorative style. EPS interior composite panels are recommended, as installing cement components is very difficult. EPS interior composite panels have issues such as long construction periods, cracking over time, and poor durability. In contrast, EPS decorative strips offer advantages like easy installation, cost-effectiveness, and long-lasting durability. With the continuous development of the decorative building materials industry, more and more new materials are emerging. EPS strips have become a favorite among many, and an increasing number of companies have entered the EPS strip market, with some standing out.
EASY INSTALLATION: With special adhesives and methods, a single person can handle the installation, especially for large-scale linear projects, requiring only bonding. The pattern effect is clear and natural, exuding elegance and richness. (5) Seamless Lines: EPS decorative lines utilize the same gap-filling material as wall bonding, ensuring all gaps are vanished, and cracks will not appear during future use. (6) Environmental Protection: Made from composite fibers, meeting national standards for non-toxic, harmless, and green building products.
EPS Foam Strips for Bonding
EPS polystyrene line dimensions and shapes are determined according to the client's drawings. For square window trim, a 45° angle can be cut and bonded using碰粘剂, while for curved shapes, butt joints with碰粘剂 can be used.
Gap Treatment
(1) Gap filling with waterproof materials, EPS interior composite boards, with crack-resistant mortar on the surface and a mesh placed in the middle.
(2) Place the crack-resistant mortar in a water-absorbent container (plastic bowl) and mix it by hand. Ensure even mixing and avoid adding too much material at once. The mixed material should be used within 0.5 hours.
(3) When using in hot weather or dry conditions, if the mixing degree is too high, a small amount of water can be added to supplement, but do not continue to use the mixture once it has lost moisture, starts to set, or has been sitting too long. EPS interior composite board manufacturer.
(4) Dust and oil stains in the gaps must be thoroughly cleaned.
(5) The seam adhesive area must be moistened with a brush dipped in clean water to ensure a strong bond.
(6) Fill the gaps with adhesive mortar, ensuring the caulked edges are level and not raised.
EPS Interior Insulation Composite Panel Manufacturer - EPS Interior Insulation Composite Panel - Suzhou Weihao Thermal Insulation Material Co., Ltd., provided by Suzhou Weihao Thermal Insulation Material Co., Ltd. Weihao boasts strong capabilities and reliable reputation, having accumulated a large number of loyal customers in the thermal and insulation material industries in Suzhou, Jiangsu. With a commitment to excellence and a spirit of continuous improvement and innovation, Weihao joins hands with you to stride towards brilliance and create a beautiful future together!
