Advantages of the MS DC Electrostatic Eliminator:

1. Operates on a low-voltage DC24V power supply, eliminating the need for high-voltage transmission. It's safe, energy-efficient, and environmentally friendly, widely used in the carts of sign printing machines. No high-voltage transmission means no risk of electric shock from damaged wires and no interference from the absence of high voltage.

2. Adjustable output frequency: Select an appropriate frequency based on different installation heights and the relative movement speed of the object to be neutralized, achieving static elimination.

3. Ion Balance Adjustment Function: Adjusts the balance of output ions as needed to achieve static electricity elimination.

4. Compact size, easy to install

Power Supply and Wiring:

This product is powered by a DC 24V power supply, which operates normally at voltages ranging from 18V to 32V. The corresponding interface is a 3-pin aviation plug.

Brown wire, Pin 1: Connect to +Vcc positive power supply

Blue wire, Pin 2: GND Negative Power Supply

Yellow-green wire, Pin 3: Grounding Connector

Power Wiring: Use at least 0.3 square millimeter wire gauge, or American Wire Gauge (AWG) 22-20.

This product utilizes cutting-edge technology, offering enhanced safety: Each tungsten steel discharge needle operates independently and is equipped with a circuit to reduce current decay, resulting in a lower output current. Direct contact with the needle does not cause an electric shock, just a slight tingling sensation. However, it is still fully capable of neutralizing static electricity, ensuring both safety and efficiency.