Shandong Yantai Integrated Pre-fabricated Pumping Station
The arrangement shall comply with the provisions of the "Code for Structural Design of Structures for Water Supply and Drainage Engineering" GB50069, and shall also meet the following requirements:
1. Meets the requirements for equipment and machinery layout, installation, operation, and maintenance.
2 Meets structural layout requirements;
3 Meets requirements for ventilation, heating, lighting, and is in compliance with technical specifications for moisture-proofing, fireproofing, noise reduction, energy conservation, labor safety, and industrial hygiene.
4 Meets transportation requirements;
Achieve an aesthetically pleasing arrangement that harmonizes with the surrounding environment.
Section 3: The elevation of the bottom plate for an integrated sewage lift station should be determined in consideration of the pump installation elevation, the layout of the inlet channel or pipeline installation requirements, and factors such as the topography and geological conditions of the precast pump station.
Four, auxiliary equipment, electrical equipment, pipelines, and cable trays installed around the water pumps within the sewage lifting pump station should be arranged to avoid cross-interference.
Five, the noise generated during the operation of the sewage lifting station shall comply with the provisions of the current national standard "Design Code for Noise Control in Industrial Enterprises" GB/T50087.
Six, the fire resistance rating of the sewage lift station should be lower than Grade II. Fire fighting facilities should be installed near the prefabricated pump station and they should comply with the current national standard for architectural fire safety, GB 50016, and the current national standard for fire safety design of hydraulic and hydroelectric engineering, SL 329.
Section 7: The design of the sewage lifting station shall comply with the provisions of "Design Code for Pumping Stations" GB50265.
Shandong Yantai Integrated Pre-fabricated Pumping Station
The pumps are equipped with a self-coupled wet installation, with the pump room and intake well integrated into a single well shaft. It is advisable to include an internal maintenance platform and a ground control panel.
