Product Features
Ruidun concrete protection agent has strong penetration and water-repellent properties; it allows the base material to breathe and allows moisture vapor to pass through, being a truly waterproof and breathable product that won't bubble or flake off. It features a silicone mesh structure that reduces the water absorption rate of the concrete base material, strengthens the base and reduces chloride ion corrosion; it effectively deals with microcracks below 0.2mm; the treated layer is usually transparent, maintaining the original appearance of the base material; it enhances resistance to staining and reduces the growth of mold and moss; it boasts excellent alkaline and durability; it can be coated with matching paint; it is an environmentally friendly water-based material.
Recommended Applications
As a facade water-proofing agent for buildings, it prevents water intrusion and protects the structure. The product can be applied to substrates such as mortar, masonry, bricks, stones, and asbestos cement. It is also suitable for protecting concrete structures affected by seawater corrosion, salt mist corrosion, deicing agent corrosion, and freeze-thaw damage, including harbors, bridgeheads, cross-sea and cross-river bridges, hydraulic engineering dams, urban overpasses, high-grade highway bridges, railway bridges, tunnels, airport runways, clear concrete buildings, thermal power plants, nuclear power plants, and sewage treatment plants.
Technical Specifications
Appearance: Milky white liquid
Chemical Composition: Silane/Siloxane Compounds
Active Ingredient Content: Approximately 40%
Density (25°C): Approximately 1.0 g/cm³
Application Method: Brushing, Rolling, High-pressure Airless Spraying
Recommended Dosage: Varies depending on the porosity of the base surface: Mortar Base: Approximately 150 - 200 g/m2; Other Porous Materials: Approximately 300 - 500 g/m2 (Pre-test required to determine exact material dosage)
Coating Applications: 2 coats
Recoat Interval: After the initial coat dries
Tool Cleaning: Water
Drying Time: 3~5 hours
Completely cured: Over 7 days, waterproofing effect is achieved several days later on any substrate. If the substrate cracks, the waterproofing effect will significantly decrease.
Appropriate Construction Weather: Clear skies, wind below 4 levels, temperature between 5~40℃
No construction under: Rainy/snowy weather, wind above 5th grade, freezing conditions below 0℃.
Packaging: 18 kg/bucket
Storage and Shelf Life: Store in original drums at 5-45°C, shelf life 12 months
