1 General Description

1.1、 Equipment Name: Shell Shell Welding Special Machine

1.2、 Quantity of Equipment:1

1.3、 Equipment Purpose:

      Completed welding between the magnetic strip and the housing, meeting the quality and production pace requirements. Welding similar products is possible by changing tools and fixtures.

1.4、 Production Pace:

15 seconds per piece, with a tolerance of 5 seconds for rhythm error.

1.5Supply Method

        Based on the requirements for product parts, part drawings, assembly drawings, technical agreement, and relevant execution standards provided by the order method, we are responsible for the design, manufacturing, and supply of welding equipment, fixtures, and tools.

2Buyer provides basic technical specifications

2.1Temperature:5-40℃

2.2Relative Humidity:20-80% RH

2.3Power: AC/3Please provide the Chinese content to be translated.

2.4Voltage:380V（-10%～+10%）

2.5Power Frequency:50HZ

2.6Compressed air supply pressure >0.5MPa

2.7Industrial Water Pressure>0.2MPa

2.8Available Assembly Area:3M×7M

2.9Factory height restriction:3M

3Equipment Description:

1Manually place the shell onto the locating fixture.

2Manual insertion of the magnetic stripe into the magnetic stripe clip

3Start button, the housing is automatically delivered to the welding position for alignment, and the magnetic assist strip is automatically positioned in the welding electrode.

4Automated welding

5The automatic return shell is rotated to a certain angle by a servo motor, and the magnetic strip feeding mechanism automatically feeds the second magnetic strip and performs welding. Repeat the above action to complete the welding of six magnetic strips on the shell.

6Manually remove the housing for welding completion

4Equipment Description

1The equipment features automatic current compensation: that is, constant current control.

2Counting Function: Equipped with a counting function during welding, enabling effective monitoring of the number of welds.

3Current Display Function: Monitor Welding Current

4Fault diagnosis and automatic protection features; during operation, if the controller detects any anomalies, it will automatically prompt

5Configuration Components: Pneumatic components are sourced from Taiwan Airtac or JapanCMCThe entire servo automatic control system is equipped with Xinje electrical controls.