Surge Arrester for AC, 380V Power Surge Protection Device OD-M80B, 80KA Surge Protection Device

Product Advantages:

1. High flow rate, low residual pressure 2; Overheat and current limiting protection; 3: Fast response time, nanosecond level; 4: 35mm guide rail, easy installation; 5: Features a degradation visible window; 6: Optional remote signal monitoring function; 7: Free combination, versatile use.

Product Installation Precautions

Power must be disconnected before installation, and operation with live electricity is strictly prohibited.

It is recommended to connect a fuse or an automatic circuit breaker in series at the front of the lightning protection module.

Please connect according to the installation diagram provided, with "+" indicating the positive line, "-" the negative line, and PE the ground line. Do not connect incorrectly. After installation,

Close the circuit breaker (fuse) switch and check if the working status is normal.

After installation, ensure the module is fully seated and check if the lightning protection module is functioning properly.

During the operation of the lightning protection module, it should be regularly inspected and the status of the fault display window checked. When the fault display window shows red (or for products with remote signal, etc.)

When the remote signal terminal outputs an alarm signal, it indicates a fault in the lightning protection module, and it should be repaired or replaced promptly.

Surge protection modules for parallel power supply should be installed in parallel (Kevin wiring method can also be used). The connecting wires must be sturdy and reliable, and should be short and thick.

Direct.