Mold temperature controllers are widely used in the plastics industry, primarily serving the purpose of:

Enhance product molding efficiency.

2. Reduce the production of defective products.

Enhance product appearance, suppress product defects.

Step up production pace, reduce energy consumption, and save energy.

Mold temperature control machines have significant application in the die casting industry, particularly in the manufacturing of magnesium and aluminum alloys. Uneven or improper mold temperatures can lead to unstable casting dimensions, deformation of castings during the production process, and defects such as thermal stress, sticking, surface indentation, shrinkage holes, and thermal blisters. These issues also impact the production cycle, introducing unstable variables in filling time, cooling time, and coating time. The mold's lifespan can also be shortened, causing expensive steel to develop thermal cracks and accelerate aging due to excessive cold and heat shocks.

Principle of operation for mold temperature control machine:

The mold temperature controller consists of a water tank, heating and cooling system, power transmission system, level control system, and components such as temperature sensors and nozzles. Typically, the pump in the power transmission system circulates the hot fluid from the water tank, which contains built-in heaters and coolers, to the mold and back to the water tank; the temperature sensors measure the temperature of the hot fluid and send the data to the controller in the control section; the controller adjusts the temperature of the hot fluid, thereby indirectly regulating the mold temperature. If the mold temperature exceeds the set value of the controller during production, the controller will open the solenoid valve to connect the inlet pipe until the temperature of the hot fluid, i.e., the mold temperature, returns to the set value. If the mold temperature is below the set value, the controller will turn on the heater.

Mold Temperature Controller After-Sales Service: To create and enhance corporate prestige, and establish a positive corporate image, we are committed to the spirit of "pursuing high quality at all times, with customer satisfaction as our guiding principle." We solemnly promise you "preferential prices, thorough service, and reliable product quality."

Buyer's department can receive free equipment operation training at our company.

After three months of use, our customer service department will assess the equipment's condition.

3. Our equipment comes with a one-year free warranty. During the warranty period, all parts and repairs are provided free of charge; however, any abnormal damage to the equipment is not covered under the warranty, and the buyer shall bear the cost of replacing parts.

4. Adjust products for consumers; provide technical support regarding usage as per consumer requests; ensure supply of repair parts; and be responsible for product repair services.

5. Outside of the free warranty period, the buyer is responsible for the cost of replacement parts (priced at the material procurement cost) in the event of equipment damage.

6. Upon receiving the customer's phone call and the "Equipment Failure Notice," remote maintenance will be conducted. If on-site service is not feasible within Guangdong, the on-site service will be provided within 72 hours outside of Guangdong.

7. Simply call us or contact us in another way, and we'll take care of your technical task issues. We'll provide the service!