PE PipeIndoor Water Supply Method

1. Direct water supply method

The system is simple and cost-effective, fully utilizing the water pressure from the external network. However, if the external network water supply is interrupted, the indoor water supply will be cut off immediately.

Applicable Locations: Water usage areas where both water volume and pressure meet the requirements.

2. Water supply method for the water tank

Water supply is reliable, the system is simple, investment is saved, and the external network water pressure can be fully utilized. The drawback is that it increases the load of the building and is prone to secondary pollution.

Applicable locations: Used when water pressure and volume are insufficient in a cyclic manner.

3. Water supply system with storage tanks, water tanks, and water pumps

Pumps can supply water to the tank in a timely manner, thus reducing the tank's volume. The water supply is reliable, but the investment is substantial, and both installation and maintenance are relatively complex.

Applicable Sites: Used when the outdoor water supply pipeline pressure is below or frequently fails to meet the requirements of the indoor water supply pipeline within the building, and when the indoor water usage is uneven.

4. Pressure-supplied water system

Reliable water supply; no high-level reservoir but low pump efficiency and high energy consumption.

Application Sites: Used when the water pressure from the external network does not meet the required pressure, water usage is uneven, and it is not suitable to install a water tank.