JS-107强力胶粉 JS-107 High-Strength Adhesive PowderFor various emulsions, a cold-soluble powder made from a tetrapolymer can substitute for boiled glue. Used in: glue production, wall bonding, water-resistant putty, heavy calcium, cement mortar, etc. For many years, the product has been sold nationwide and has been exported to Indonesia, the Philippines, Vietnam, Africa, the Middle East, and seven other countries.
The company solemnly promises a three-in-one product warranty: return, exchange, and successful technical support. Rest assured in using our premium products.
Basic Features:
JS-107强力胶粉 - JS-107强力Adhesive PowderA white powder, non-toxic and non-radioactive, free of formaldehyde, belongs to an environmentally-friendly modified resin multi-functional adhesive powder. It dissolves rapidly in cold water to form a strong-adhesive transparent adhesive liquid.
Main Application:
Used for wall bonding in construction adhesives, water-resistant interior wall putty, trunk whitewashing, damp wall coverings, interior and exterior water-based paints, skim coating of heavy calcium, talcum powder, silicate grey white cement, decorative white cement, grout, ceiling, plaster mortar, repair mortar, etc.
Adhesive Manufacturing Method:
(Add 15kg of powder to 1000kg of water, add 66kg of water to 1kg of powder)
Step: To1,000 kgCold water is added to the high-speed disperser, followed by the addition of high-temperature-resistantDisinfectant and preservative D7: 2Add to water, turn on the disperser.Speed adjusted to around 500 RPMStir the water into a whirlpool.
Two-stepPlease provide the Chinese content to be translated.15 kgLatex powder2 minutesPour in slowly (do not pour in all at once to avoid clumping together), stir15 minutesReady-to-use adhesive liquid
Step 3Powdered rubberAll poured into the water and dispersed after.Adjust the speed toApproximately 150 RPM per minute(To prevent foaming), mix for 10-15 minutes to form the adhesive liquid, and use low-speed stirring to avoid foam formation.
Wall Bonding Adhesive Effect Image
Manufacturing method for wall bonding agent (interface agent):
The ratio of rubber powder to water is:JS-107 powder, 1 kg, mixed with 50 kg of water）。
Suggestion:Utilize subterranean well无菌 water or pure water for extended shelf life.
Step：Translate980 kgCold water is added to the high-speed disperser, thenHigh-Temperature Resistance Sterilization and Antiseptic Agent D7:2.5 kgAdd to water, turn on the disperser, adjust the speed to RPM per minute500 RPMTo the left, stir the water into whirlpools.
Two-step: To20 kg JS-107PVA powder2 minutesSprinkle slowly (do not pour all at once to avoid clumping), wait until all the glue powder is evenly dispersed in the water, then adjust the speed to [insert speed] RPM.150 RPMStir for 15 minutes (to avoid foaming), then it becomes the ready-to-use adhesive liquid.
Three steps：VAE Emulsion(Model 707Add according to the formula ratio to the adhesive liquid.
Four stepsDispersant:Sodium hexametaphosphate, 3 kgPour slowly, stir for 10 minutes, then transfer to buckets for finished product.
The adhesive produced is a thick, transparent liquid; coloring is available upon request.Add organic pigments, titanium blue pigment, ink or titanium dioxide powder for coloring.
