Spray Textured Coating PowderHigh molecular weight modified resin powder, suitable for interior and exterior wall spray texturing, casting, bridge culverts, road embankments, and spray construction. High strength and excellent adhesion; no curing required.

Basic Features:

Spray Textured Coating PowderThis is a white powder, non-toxic, odorless, and non-radioactive, free of formaldehyde and other harmful substances, and belongs to an environmentally friendly modified resin adhesive powder. It dissolves rapidly in cold water to form a strong adhesive that tightly bonds with the wall, preventing hollowing.

Primary Application:

For use on non-fired brick, aerated block walls and floors, bridges, culverts, road slopes, textured spray coatings, and wall fixings and interface mortars on cement structures. Suitable for: exterior and interior wall texturing spray coatings in high-rise residential communities, with high hardness and strong adhesion, no curing required.

Site of roughcasting construction

1 lbPowder blending55 kgWater2Bagged cement1Bagged sand (40-80 mesh) or stone dust.

First add water, then mix with cement to form a slurry, sprinkle the adhesive powder in, and stir while adding sand.10 minutesReady for installation.

Note:Spray roads, slopes, bridges, and culverts.3 bags of slurry mixed with cement, 2 bags of medium sand.

Actual construction site, one bag of adhesive powder can spray about 8,000 square feet.

Method of Linting:

Bonding powder for textured wall: 1 kg powder, 55 kg water (powder to water ratio 1:55).

Silicate 43.5#: 100 kg. Medium sand (or stone powder): 40 kg.

Silicate Cement: Sand (or stone dust) 60%: Cement 40%, in appropriate quantities

Note: After the exterior wall spray, water curing should be performed once after 24 hours.