Outdoor pavement cuttingMethod:

Cut into pieces not exceeding 500kg each, and unload the concrete blocks on the next level or on the ground.

2. Based on the design drawings, determine the cutting area. First, mark the required cutting edges on the floor surface with a pencil line, then, according to the lifting equipment, determine the floor panel sizes to be approximately 1.5m x 1.5m.

3. Clear the cutting area, including removing ground debris, structures, and decorations, as well as various piping that affects cutting (air ducts, electrical conduits, rainwater pipes, etc.).

4. Before floor cutting of the main structure, a type steel overhead crane is used, with the hoist架 securely fastened to the beams.

On the floor to be cut, drill four holes evenly using a drilling machine, thread steel wire ropes through them, then hang them on the hooks of two hand winches. After concrete cutting, the suspended buckets are placed on the hoist frame.

Tighten the hand winch to ensure full tension.

6. Utilize reinforced concrete cutting machines with dedicated personnel for on-site guidance.

  7.After outdoor road cutting construction in Huhhot, use two hand-cranked winches to gently lower the cut floorboards onto the lower level or ground.