Inner MongoliaBuilding Cutting ServicesHydraulic wire saws feature significant advantages such as reduced labor intensity, safe operation, overload protection, powerful power, and improved cutting capabilities and labor productivity. They are equipment used in demolition and dismantling projects. Blasting demolition involves drilling holes in the support beams with a hammer drill, then clearing the concrete blocks using manual and mechanical methods after the blast. Its benefits include fast construction speed, simple cleanup, and low cost. However, the drawbacks include difficulties in obtaining relevant permits, significant environmental impact on the surroundings, and limitations.

HohhotBuilding Cutting ConstructionStatic blasting demolition: Use an air hammer to drill into the surface of the supporting beam, cut the stirrups, then drill holes in the beam with an expansion agent added, which expands upon reaction to crack the beam, followed by further hammering and breaking, and finally cleaning. Advantages include minimal restrictions, safety, easy cleanup, and moderate costs; disadvantages are slow construction speed and the need for a large workforce. Cutting: Cut the supporting beam into blocks using cutting methods, hoist them down to the edge of the foundation pit or transport to the location, and recycle the broken steel bars. The limitation of cutting removal is that a large crane can be placed around the foundation pit. Its advantages are fast construction speed, cost-effectiveness with expedited construction methods, and lower costs when a large crane can be placed; disadvantages include high site requirements (where cranes need to be placed) and difficult transportation (if not able to be stacked and broken on-site).