Technical specifications of the above welding rod drying oven (please refer to):
Specs and Parameters: (Customizable according to customer requirements)
Inner Dimension: See below table list
Inner Material: Stainless Steel Sheet
Outer Material: Cold-rolled steel plate, coated paint (optional colors, baked finish, hammer texture, matte finish, spray plastic)
Frame: Channel steel angle steel integrated frame
Insulation Material: Highly heat-resistant aluminum silicate wool
Bottom Load-Bearing: Channel Frame
Support Foot: Channel steel fixed support foot or adjustable swivel casters
Heating Tube Material: Stainless Steel Electric Heating Tube, suitable for continuous use for 70,000 to 80,000 hours
Heating tube distribution: Evenly distributed across the top and bottom of the cabinet based on its size.
Door latch: Alloy weight-bearing hinge and upper/lower buckle-type pull rod
Factory Accessories:
1. Mesh board trolley
2. Product Manual
3. Post-Sales Maintenance Warranty Card
4. Product Compliance Certificate
5. Comprehensive Tool Kit
Optional Configuration: See Optional Items
Product Main Technical Parameters: (Please refer)
Special specifications and requirements can be customized upon request.
Performance Advantages: (Ongoing Improvement)
Heating SystemUtilizing far-infrared heating, with high radiation efficiency and faster heating speed. The heating tubes are evenly distributed, ensuring the system is completely independent without affecting the control circuit. Both temperature control and power are calculated by the computer, automatically adjusting the heating output power based on the internal temperature to meet precise electrical demands. This design is more environmentally friendly and energy-efficient.
Temperature Control SystemUtilizing a microcomputer digital display intelligent temperature controller with PID adjustment, featuring a digital timer relay, high precision, and clear visibility. It works in conjunction with solid-state relays for continuous adjustment. Once the temperature reaches the preset value, the relay receives the signal from the temperature controller to control, allowing the temperature to fluctuate finely within the PID temperature range for stable operation, thus enhancing the precision of the internal temperature. The circuit is equipped with an over-temperature protector, which immediately cuts off the control power if the instrument fails or an operation error causes the temperature to exceed the set value, ensuring the safety of the products inside. The over-temperature protector can be adjusted within the approved range.
Insulation performance—Excellent insulation technology with significant sealing effectiveness, the outer box maintains the indoor normal temperature, exerting minimal influence on the ambient temperature.
System ProtectionLeakage protection, circuit protection, short circuit protection, overload protection, over-temperature protection.
Electrical Configuration: (Customizable according to customer requirements)
Thermostat:A set of intelligent digital temperature controller for automatic temperature control, with a control accuracy of 0.1-1 degree and PID adjustment.
Time Setting Device:HS48S-99.99 Timer Device, featuring manual/automatic switching. Starts timing when the temperature reaches the set value, and cuts off the heating power source once the set range is achieved.
Time-Alarm DeviceAPT/AD16 type sound and light alarm device, immediate alarm upon completion of set time, manual end alarm prompt.
Over-temperature alarm device:When the temperature exceeds the set value range, the protector immediately cuts off the control power supply.
Thermometer Device:A stainless steel PT100 platinum resistance temperature sensor for precise temperature measurement, and a stainless steel K-type platinum resistance temperature sensor for use in over-temperature protectors.
Circuit breaker activation:Leakage protected circuit breakers for power supply, effectively protecting certain electrical components.
Contactor:PID+SSR (optional) output, precise temperature control accuracy, improves the stability of the temperature control components and interfaces, and extends their service life, ensuring uniformity of the internal temperature.
Current Voltage:220/380V, 50Hz, two-phase/three-phase four-wire and properly grounded.
Switches and indicator lights:Utilize Chint brand for durability; available to use as requested or with a specific brand.
Recorder:Paper or paperless recorder with USB, microcomputer integrated control system: available for customer selection.
Equipment Usage Environment: (Please Note)
Installation Site:The ground is level, well-ventilated, with no intense vibrations around the equipment, no safety hazards, no strong magnetic fields nearby, no direct sunlight or other heat sources radiating directly, no high concentration of dust, and no corrosive, flammable, or explosive materials. Adequate space for use and maintenance must be left around the equipment.
Pressure Application86-106Kpa
Environmental Requirements:Temperature range: -5 to 40 degrees, relative humidity: ±85% RH.
Power Source:Customers are required to install a separate air or power switch of corresponding capacity for this equipment and properly connect the ground wire.
After-Sales Service: (Caring deeply about our customers)
Warranty Period:From the date of delivery, our company offers 12 months of full-machine maintenance and warranty, with lifetime repair and maintenance services.
Warranty Information:During the warranty period, if quality issues arise, our company will provide free repairs and replacement of certain parts. Outside the warranty period, replacement parts will be charged at the market cost price only.
After-sales service:Our company received a customer service call for after-sales support. We respond within one hour. If the customer is unable to resolve the issue themselves, we will arrive at the customer's location within 24 to 72 hours, depending on the distance.
Service Support:Our company offers lifetime software upgrades and free technical support for the hardware components.
