I. Product Principle and Advantages:

XinHai Brand® Hygroscopic Dust Suppressant is a mixture composed of hygroscopic chemicals and surfactants. It alters the hydrophobicity of dust particles, enhancing their agglomeration and wetting effects to suppress dust generation. Spraying this hygroscopic dust suppressant on dusty roads causes the loose and fine dust to become moistened, thereby increasing both its mass and the forces between particles, making it less likely to be blown away. Moreover, the dust particles continue to absorb moisture from the air after becoming moistened, maintaining the dust's moisture content and preventing secondary dust generation as moisture evaporates. Furthermore, the moistened dust, due to its adhesive properties, can also moisten and agglomerate subsequent dust settling on the road, ensuring that no dust will rise again under moist conditions. This product also features safety, environmental friendliness, and ease of use.

Section 2: Application Range:

Moisture-retaining dust suppressant is primarily used in roadways of various environments (such as urban streets, highways, rural dirt roads, mining roads, etc.), as well as in the transportation of mineral powders and coal ash, where dust control is necessary. It boasts advantages such as resistance to crushing, non-sticky to tires, non-slip, long-lasting moisture retention, and water conservation.

Section 3: Usage Instructions:

Spraying: Dust suppressant can be applied using water trucks, professional sprinkler stations, and fixed spray systems, etc. To achieve dust control, dust reduction, and dust sealing, evenly spray the diluted dust suppressant solution onto road surfaces or dust-raising areas. The specific application method and dosage can be adjusted according to the on-site conditions to achieve the desired results.

Four, Cautionary Notes

Stir promptly upon release to prevent clumping into lumps.

2. Do not dilute this product with water containing strong acids or bases.

3. Use as needed, avoid long-term exposure to air.

4. Respray is required when there is obvious surface damage to the object.

5. Spills should be cleaned up promptly.

6. Please clean and maintain the equipment promptly after use.

7. If swallowed, inhaled, or gets into eyes or nose, rinse thoroughly with water immediately. If discomfort persists, seek medical attention promptly.