Technical specifications of the welding rod drying oven shown above: (Please refer to)
Specs and Parameters: (Customizable according to customer requirements)
Inner diameter size: See the table below for details.
Inner Material: Stainless Steel Sheet
Exterior Material: Cold-rolled steel plate, coated surface (optional colors, baked paint, hammer texture paint, matte paint, electrostatic powder coating)
Frame: Channel steel angle steel integrated frame
Insulating Material: High-temperature-resistant Aluminosilicate Wool
Bottom Load-bearing: Channel Frame
Foot Support: Fixed槽钢-bearing foot or adjustable swivel casters
Heating Tube Material: Stainless Steel Electric Heating Tube, suitable for continuous use up to 70,000-80,000 hours
Heating tube distribution: Evenly distributed across the top and bottom of the case according to the size of the case.
Door hinge: Alloy bearing hinge and top and bottom buckle-type pull rod
Factory Components:
1. Web plate trolley
2. Product Manual
3. After-Sales Maintenance Warranty Card
4. Product Compliance Certificate
5. Comprehensive Tool Kit
Optional Configuration: See Optional Items
Product Main Technical Parameters: (Please refer to)
Special specifications and requirements can be customized upon request.
Performance Advantages: (Ongoing Improvements)
Heating SystemUtilizing far-infrared heating technology, with high radiant efficiency and faster heating speeds. The heating tubes are evenly distributed, ensuring the system operates independently without affecting the control circuit. Both temperature control and power are calculated by the computer, automatically adjusting the heating output power based on the internal temperature to meet precise power demands. This design is more environmentally friendly and energy-efficient.
Temperature Control SystemUtilizing a microcomputer digital display intelligent temperature controller with PID adjustment, featuring a digital timer relay, high precision, and clear visibility. When paired with solid-state relays, it offers continuous adjustment capabilities. Once the temperature reaches the preset value, the relay accepts the controller's output signal source for regulation, ensuring the temperature remains within the PID temperature range with fine fluctuations for constant temperature action. This enhances the accuracy of the internal temperature. The circuit is equipped with an over-temperature protector, which immediately cuts off the control power in case of instrument failure or operational error causing the temperature to exceed the set value, ensuring the safety of the products inside. The over-temperature protector can be adjusted within the approved range.
Insulation EffectivenessExcellent thermal insulation technology, significant sealing effect, the exterior of the box maintains the normal indoor temperature, with minimal impact on the ambient temperature.
System ProtectionLeakage protection, circuit protection, short-circuit protection, overload protection, over-temperature protection.
Electrical Configuration: (Customizable according to customer requirements)
Temperature Controller:An intelligent digital temperature controller for automatic temperature control, with a precision of 0.1-1 degree, featuring PID adjustment.
Timer Setting DeviceHS48S-99.99 timer device, featuring manual/automatic switching. It starts timing when the temperature reaches the set value and shuts off the heating power once the set range is achieved.
Time-Alarm DeviceAPT/AD16 type sound and light alarm device, immediate alarm upon time setting completion, manual termination alarm prompt.
Over-temperature alarm device:When the temperature exceeds the set value range by a certain margin, the protector immediately cuts off the control power supply.
Thermometer Device:A stainless steel PT100 platinum resistance temperature sensor for precise temperature measurement, and a stainless steel K-type platinum resistance temperature sensor for use in over-temperature protectors.
Circuit Breaker Activation:Circuit breakers with leakage protection for starting power, effectively protecting certain electrical components.
Contactor:PID+SSR (optional) output, precise temperature control accuracy, enhances the stability of the temperature control components and interfaces, and extends their service life, ensuring uniformity of the internal temperature.
Current Voltage:220/380V, 50Hz, two-phase/three-phase four-wire system with a properly grounded wire.
Switches and indicator lights:Utilizing Chint brand, durable, and customizable to use either or a specific brand as per customer request.
Recorder:With or without paper recorder and USB, microcomputer integrated control system: available for customer selection.
Equipment Operating Environment: (Please Note)
Installation Site:The ground is level, well-ventilated, with no intense vibrations around the equipment, no safety hazards, no strong magnetic fields nearby, no direct sunlight or other heat sources radiating directly, no high concentration of dust, and no corrosive, flammable, or explosive materials. Adequate space for operation and maintenance must be left around the equipment.
Using Pressure:86-106Kpa
Environmental Requirements:Temperature range: -5 to 40 degrees Celsius, relative humidity ±85% RH.
Power Supply:Users are required to configure a separate air or power switch corresponding to the capacity of this equipment, and properly connect the ground wire.
After-sales Service: (Caring deeply for our customers)
Warranty PeriodFrom the date of delivery, our company offers 12 months of full machine maintenance and warranty, as well as lifetime repair and maintenance services.
Warranty Information:During the warranty period, in case of quality issues, our company will provide free repairs and replacement of parts. Outside the warranty period, replacement parts will be charged at the market cost price of the components only.
After-Sales ServiceWe received a customer after-sales service call and responded within one hour. If the customer is unable to resolve the issue themselves, our company will arrive at the customer's location within 24 to 72 hours, depending on the distance.
Service Support:Our company offers lifetime software and control system upgrades, along with free technical support for hardware components.
