Specs and Parameters (Customizable according to customer requirements)
Key Performance Advantages: Continuous Baking Items
Inner Diameter: Customized according to customer requirements or product size
Inner Material: Stainless Steel or Cold Rolled Steel Plate
Exterior Material: Cold-rolled steel plate or stainless steel plate, with surface coating (see optional items for details)
Line Frame: Channel steel tube or stainless steel frame
Belt Material: Select Teflon, stainless steel mesh, carbon steel mesh, drum, or chain mesh based on the characteristics of the baking product.
Thermal Insulation Material: High-temperature-resistant Aluminum Silicate Wool
Bottom Load-bearing: Square Tube Channel Beam
Support Leg: Fixed channel steel support foot or swivel castor with mobility
Heating Tube Material: Stainless steel, carbon steel, or quartz tube heating tubes, capable of continuous use for 70,000 to 80,000 hours.
Heating tube distribution: Evenly distributed along the side air ducts of the chamber on both sides, and at the top air duct
Air Distribution: Dual-airway horizontal air supply or dual-airway high-pressure circulation air supply
Blower Motor: High-temperature-resistant motor with longer shaft and multi-blade impeller
Motor Installation: Top, Side, or Bottom
Optional Configurations: See Optional Items
Performance Advantages (Ongoing Improvement)
Blower systemOptimized air duct design featuring a high-temperature-resistant fan motor with centrifugal blades, delivering strong, turbo-style air circulation to avoid dead spots. This ensures more even hot air distribution inside the unit, leading to greater energy efficiency and quieter operation. It provides an excellent operational environment, with wind speed and pressure meeting test standards and environmental protection requirements. Some components offer high reliability and compatibility, with ease of installation, maintenance, and repair.
Heating SystemUtilizing far-infrared heating, with high radiant effect and faster heating speeds. The heating tube distribution is rational, and the system is completely independent, without affecting the control circuit. Both temperature control and power are calculated by the computer. It automatically adjusts the heating output power based on the internal temperature to meet high-precision power requirements, offering greater environmental friendliness and energy efficiency.
Temperature Control SystemUtilizing a microcomputer digital display intelligent temperature controller with PID adjustment, featuring a digital timer relay, high accuracy, and clear visibility. When paired with solid-state relays, it offers continuous adjustment capabilities. Once the temperature reaches the preset value, the relay controls the output signal from the temperature controller to maintain a constant temperature action within the PID temperature range. This enhances the precision of the internal temperature. The circuit is equipped with an over-temperature protector, which immediately cuts off the control power in case of malfunction or operational errors causing the temperature to exceed the set value, ensuring the safety of the products inside. The over-temperature protector can be adjusted within the approved range.
Insulation performance—Excellent insulation technology, significant sealing effect, the exterior of the box maintains the normal indoor temperature, with minimal impact on the ambient temperature.
System ProtectionLeakage protection, line protection, short circuit protection, overload protection, over-temperature protection.
Electrical Configuration (Customizable according to customer requirements)
Temperature Controller:A set of intelligent digital temperature controller with automatic temperature control, accuracy of 0.1-1 degree, with PID adjustment.
Time Setting Device:HS48S-99.99 Timer Device, featuring manual/automatic on/off, starts timing when the temperature reaches the set value, and cuts off the heating power supply once the set range is achieved.
Time-Alarm DeviceAPT/AD16 type acoustic and optical alarm device, immediate alarm upon completion of setting time, manual end alarm prompt.
Over-temperature alarm device:When the temperature exceeds the set value range, the protector immediately cuts off the control power supply.
Thermometer Device:A stainless steel PT100 platinum resistance temperature sensor for precise temperature measurement, and a stainless steel K-type platinum resistance temperature sensor for use in over-temperature protectors.
Circuit Breaker Activation:Leakage protected circuit breakers for starting power, effectively protecting certain electrical components.
Contactor:PID+SSR (optional) output ensures accurate temperature control, enhancing the stability of the control components and interfaces, thereby extending their lifespan and guaranteeing uniformity of the internal temperature.
Current Voltage:220/380V, 50Hz, two-phase/three-phase four-wire and properly grounded.
Switches and indicator lights:Utilize the Chint brand; durable and customizable to customer preference or specific brand.
Recorder:With or without paper recorders and USB, microcomputer integrated control system: customizable according to customer's choice.
Equipment Operating Environment (Please Note)
Installation Site:The ground is level, well-ventilated, free of excessive vibration around equipment, with no safety hazards, no strong magnetic fields nearby, no direct sunlight or other heat sources radiating directly, no high concentration of dust, and no corrosive, flammable, or explosive materials. Adequate space for usage and maintenance should be left around the equipment.
Pressure Application:86-106Kpa
Environmental Requirements:Temperature range: -5 to 40 degrees Celsius, relative humidity ±85%
Power Source:Customers must configure a separate air or power switch corresponding to the capacity of this equipment and properly connect the ground wire.
After-Sales Service (Caring for Customers with Dedication)
Warranty Period:From the date of delivery, our company provides 12 months of full maintenance and warranty for this equipment, with lifetime repair and maintenance services.
Warranty Information:During the warranty period, if quality issues arise, our company will provide free repairs and replacement of certain parts. Outside the warranty period, replacement parts will be charged at the market cost price of the components only.
After-sales Service:Our company received a customer service call for after-sales support, and we responded within one hour. If the customer is unable to resolve the issue themselves, we will arrive at the customer's location within 24 to 72 hours, depending on the distance.
Service Support:Our company offers lifetime upgrades for the equipment's software and control system, along with free technical support for the hardware.
