Specification Parameters (Customizable as per customer requirements)
Primary Performance Advantages: Continuous Baking Items
Inner Diameter Size: Customized according to customer requirements or product dimensions
Inner Shell Material: Stainless Steel or Cold Rolled Steel Plate
Exterior Material: Cold-rolled steel plate or stainless steel plate, with surface coating (see optional items for details)
Line Frame: Channel steel tube or stainless steel frame
Slat Material: Select Teflon, stainless steel mesh, carbon steel mesh, roller, or chain-type mesh slats based on the characteristics of the baking product.
Insulating Material: High-temperature-resistant Alumina Silicate Wool
Bottom Load-bearing: Square Tube Channel Steel
Support Foot: Channel steel fixed support foot or movable swivel castor
Heating Tube Material: Stainless steel, carbon steel, or quartz tube heating tubes, designed for continuous use up to 70,000-80,000 hours.
Heating tube distribution: Evenly distributed along the side air ducts of the chamber on both sides, and at the top air duct
Air Distribution: Dual-airway horizontal air supply or dual-airway high-pressure circulation air supply
Blower Motor: High-temperature-resistant motor with longer shaft and multi-blade impeller
Motor Installation: Top, Side, or Bottom
Optional Configurations: See Optional Items
Performance Advantages (Ongoing Improvement)
Blower SystemOptimized air duct design, featuring a high-temperature-resistant fan motor with centrifugal blades, delivers strong turbine-style air circulation, eliminating dead spots. This ensures more even heat distribution inside the chamber, greater energy efficiency, and quieter operation. It provides an excellent operating environment, with wind speed and pressure meeting testing standards and environmental protection requirements. Some components offer high reliability and compatibility, with ease of installation, maintenance, and repair.
Heating SystemUtilizing far-infrared heating technology, it boasts high radiant efficiency and faster heating speeds. The heating tubes are evenly distributed, ensuring the system operates independently without affecting the control circuit. Both temperature control and power are calculated by the computer, automatically adjusting the heating output power based on the internal temperature to meet precise electrical demands. This not only enhances environmental protection but also contributes to energy savings.
Temperature Control SystemUtilizing a microcomputer digital display intelligent temperature controller with PID adjustment, featuring a digital timer relay, high accuracy, and clear visibility. When paired with a solid-state relay, it offers continuous adjustment capabilities. Once the temperature reaches the preset value, the relay receives the temperature controller's output signal source to regulate, ensuring the temperature remains within the PID temperature range for precise and stable operation. This improves the internal temperature accuracy of the box. The circuit is equipped with an over-temperature protector, which immediately cuts off the control power if the instrument fails or an operation error causes the temperature to exceed the set value, ensuring the safety of the products inside. The over-temperature protector can be adjusted within the approved range.
Insulation performance—Excellent thermal insulation technology, significant sealing effect; the exterior of the box maintains the normal indoor temperature, with minimal impact on the ambient temperature.
Protective SystemLeakage protection, circuit protection, short-circuit protection, overload protection, over-temperature protection.
Electrical configuration ( customizable according to customer requirements )
Thermometer controller:An intelligent digital temperature controller for automatic temperature control, with a temperature control accuracy of 0.1-1 degree and PID adjustment.
Time Setting Device:HS48S-99.99 timer device, with manual/automatic on/off capability, starts timing when the temperature reaches the set value, and cuts off the heating power supply once it reaches the set range.
Time Alarm DeviceAPT/AD16 type acoustic and light alarm device, immediate alarm upon completion of setting time, manual termination alarm prompt.
Over-temperature alarm device:When the temperature exceeds the set value range by a certain margin, the protector immediately cuts off the control power.
Thermometer device:A stainless steel PT100 platinum resistance temperature sensor for precise temperature measurement, and a stainless steel K-type platinum resistance temperature sensor for use with an over-temperature protector.
Circuit Breaker Activation:Circuit breakers with leakage protection for power supply, effectively protecting certain electrical components.
Contactor:PID+SSR (optional) output ensures accurate temperature control, enhancing the stability and extending the service life of the temperature control components and interfaces, ensuring uniformity of the internal temperature.
Current Voltage:220/380V, 50Hz, two-phase/three-phase four-wire with proper grounding.
Switches and indicator lights:Utilizing Chint brand, durable and reliable, available to use according to customer preference or a specific brand.
Recorder:Paper or paperless recorder with USB, microcomputer integrated control system: optional as per customer's choice.
Equipment Operating Environment (Please Note)
Installation Site:The ground is level, well-ventilated, with no severe vibrations around the equipment, no safety hazards, no strong magnetic fields nearby, no direct sunlight or other heat sources, no high concentration of dust, and no corrosive, flammable, or explosive materials. Adequate space for use and maintenance around the equipment is required.
Pressure Application:86-106Kpa
Environmental Requirements:Temperature range: -5 to 40 degrees Celsius, Relative humidity: ±85%
Power Source Used:Customers are required to install a corresponding air or power switch with adequate capacity for this equipment and securely connect the ground wire.
After-Sales Service (Caring for Customers with Dedication)
Warranty Period:From the date of delivery, our company offers 12 months of full machine maintenance and warranty, as well as lifetime repair and maintenance services.
Warranty Information:During the warranty period, any quality issues will be addressed with free repairs and replacement of parts. Outside the warranty period, replacement parts will be charged at the market cost of the components only.
After-sales Service:Our company received a customer's after-sales service call and responded within one hour. In cases where the customer cannot resolve the issue independently, our company will arrive at the customer's site within 24 to 72 hours, depending on the distance.
Service Support:Our company offers lifetime upgrade services for the equipment's software and control systems, and provides free technical support for the hardware components.
