Specification Parameters: (Customizable according to customer requirements)
Key Performance Advantages: Easy operation with cart transport. Select the cart style according to the characteristics of the baking product (see optional items).
Inner Diameter Size: See below chart for details (standard sizes available, custom sizes supported for customer orders)
Inner Material: Stainless Steel or Cold-Rolled Steel Plate
Exterior Material: Cold-rolled steel plate or stainless steel plate, with surface coating (colors available, see optional items)
Frame: Channel steel angle steel integrated frame
Thermal Insulation Material: Highly Heat-Resistant Alumino-Silicate Wool
Bottom Load-Bearing: Channel Frame
Track: Channel or I-beam track with external guide rail
Heating Tube Material: Far-infrared stainless steel sheathed heater (SHEATHED HEATER), suitable for continuous use up to 70,000-80,000 hours.
Heating tube distribution: Evenly distributed along the side air ducts, top air duct, or bottom air duct of the housing, based on the size of the housing.
Air Distribution: Dual-airway horizontal air supply or dual-airway high-pressure recirculation air supply
Blower Motor: High-temperature-resistant motor with long shaft and multi-blade impeller
Motor Installation: Top, Side
Door latch: Aluminum alloy bearing hinge and top-bottom connecting rod latch
Factory Components:
1. Flatbed Trolley / Multi-tier Push Cart
2. Product Manual
3. After-Sales Maintenance Warranty Card
4. Product Compliance Certificate
5. Comprehensive Tool Kit
Optional Configurations: See Optional Items
Special specifications and requirements can be customized upon request.
Performance Advantages: (Ongoing Improvement)
Blower SystemOptimized air duct design featuring a high-temperature-resistant fan motor with centrifugal blades, delivering strong turbine-style air circulation to avoid dead spots. This ensures more even heat distribution inside the unit, offering greater energy efficiency and quieter operation. It provides a better operating environment, with wind speed and pressure meeting testing standards and environmental protection requirements. Some components offer high reliability and compatibility, with ease of installation, maintenance, and repair.
Heating SystemUtilizing far-infrared heating technology, it boasts high radiation efficiency and faster heating speeds. The heating tubes are evenly distributed, ensuring the system operates independently without affecting the control circuitry. Both temperature control and power are calculated by the computer, automatically adjusting the heating output power based on the internal temperature to meet precise electrical requirements. This not only enhances environmental protection but also promotes energy conservation.
Temperature Control SystemUtilizing a microcomputer digital display intelligent temperature controller with PID adjustment, featuring a digital timer relay, high precision, and clear visibility. When paired with solid-state relays, it offers continuous adjustment functionality. Once the temperature reaches the preset value, the relay receives the signal from the temperature controller and controls the power, allowing the temperature to fluctuate finely within the PID range for a constant temperature operation. This improves the temperature accuracy inside the box. The circuit is equipped with an over-temperature protector, which immediately cuts off the control power in case of instrument failure or operational errors leading to temperatures exceeding the set values, ensuring the safety of the products inside. The over-temperature protector can be adjusted within the approved range.
Insulation EffectivenessExcellent thermal insulation technology, significant sealing effect, the box maintains the indoor normal temperature, with minimal impact on the ambient temperature.
System ProtectionLeakage protection, circuit protection, short circuit protection, overload protection, phase sequence protection, over-temperature protection.
Electrical Configuration: (Customizable according to customer requirements)
Temperature Controller:A set of intelligent digital temperature controller for automatic temperature control, with a control accuracy of 0.1-1 degree and PID adjustment.
Time Setting Device:HS48S-99.99 timer device, featuring manual/automatic on/off, starts timing when the temperature reaches the set value, and cuts off the heating power supply once it reaches the set range.
Time Alarm DeviceAPT/AD16 type acoustic and optical alarm device, alarms immediately upon completion of set time, manual shutdown for alarm reminder.
Over-temperature alarm device:When the temperature exceeds the set value range by a certain degree, the protector immediately cuts off the control power supply.
Thermometer device:A stainless steel PT100 platinum resistance temperature sensor for precise temperature measurement, and a stainless steel K-type platinum resistance temperature sensor for use in over-temperature protectors.
Circuit breaker activation:Circuit breakers with leakage protection for starting power, effectively protecting certain electrical components.
Contactor:PID+SSR (optional) output, with precise temperature control accuracy, enhancing the stability of the temperature control components and interfaces, and extending their service life, ensuring uniformity of the internal temperature.
Current Voltage:220/380V, 50Hz, two-phase/three-phase four-wire with properly connected earth wire.
Switches and indicator lights:Utilize Chint brand for durability; available to use as per customer request or a specific brand.
Recorder:Paper or paperless recorder with USB, microcomputer integrated control system: available as per customer selection.
Equipment Operating Environment: (Please Note)
Installation Site:The ground is level, well-ventilated, with no severe vibrations around the equipment, no safety hazards, no strong magnetic fields nearby, no direct sunlight or other heat sources radiating directly, no high concentration of dust, and no corrosive, flammable, or explosive materials. Adequate space for use and maintenance around the equipment is required.
Pressure Application:86-106Kpa
Environmental Requirements:Temperature range: -5 to 40 degrees Celsius, relative humidity ±85% RH.
Power Source:Users must configure a separate air or power switch corresponding to the capacity of this equipment and properly connect the ground wire.
After-sales Service: (Customer-Centric)
Warranty Period:From the date of delivery, our company offers 12 months of full machine maintenance and warranty, as well as lifetime repair and maintenance services.
Warranty Information:During the warranty period, we will provide free repair and replacement of parts. For parts replacement outside the warranty period, we will charge only the market cost of the parts.
After-Sales ServiceWe received a customer after-sales service call and responded within one hour. If the customer is unable to resolve the issue themselves, our company will arrive at the customer's location within 24 to 72 hours, depending on the distance.
Service Support:Our company offers lifetime software and control system upgrades, as well as free technical support for hardware components.
