Duwan Environmental ProtectionG TypeScrew PumpManufacture, inspection, testing, and acceptance

Duwan Environmental Protection for screw pumpsEstablish a comprehensive quality inspection system to ensure that all factors affecting product safety, reliability, operational performance, and long-term durability have been considered, and necessary tests, inspections, and calibrations are conducted on processing, inspection, and testing equipment.

Sludge screw pump manufacturing, inspection, testing, and acceptance should be conducted in accordance with relevant standards, specifications, and regulations. The seller should note that these requirements do not replace the internal quality assurance measures of the manufacturing facility. The seller shall submit the required inspection, testing results, and records for the buyer's approval.

Inspect materials used for manufacturing sludge screw pumps and issue material factory pass certificate, material inspection and test records.

In accordance with the requirements of relevant standards, specifications, and regulations, static and dynamic balancing tests are conducted on the main rotating components of the pump.

All pressure-bearing parts of the screw pump, including the cooling jacket, must be statically tested in accordance with regulations within the manufacturer's workshop, with the static test pressure not being less than the closed lift head (zero flow rate).Twice and not less than 0.2 MPa.

Under the specified test pressure, no part of the pump shall exhibit deformation or signs of deformation, nor shall any other defects be present. The performance tests for the sludge screw pump and the motor shall be conducted in accordance with the standards specified, and the permissible deviations for all indicators shall comply with the relevant standards.

For the pumps supplied, the performance curves should start from the closed-point (zero flow) and extend at least to the rated flow point.130%, and should include the following: pump position number, pump model and specifications, test speed, test medium and temperature, performance curve, design operating point.

During testing of the screw pumps supplied, the mechanical seal provided with the contract equipment should be used.

In addition to witnessing tests required by the buyer, inspections of the ordered equipment materials, manufacturing, and packaging can be conducted at the manufacturing facility at any time during the production process. During the inspection,Manufacturer to customerProvide all drawings and documentation for processing and assembly, inspection tools and equipment, as well as relevant standards and specifications for equipment manufacturing and inspection, to facilitateUserPerform inspection tasks.

Upon completion of the inspection, all drawings, documentation, inspection tools, and the standards and specifications used shall be returned to the manufacturer.

Painting on the equipment surface is not permitted until all inspection work is completed.

The original records of inspections and tests are to be retained by the seller for five years from the date of shipment of the equipment.

Screw pumpFactory ShipmentMaterialsDetailed breakdown attached

Screw PumpOrigin, Country, and Manufacturer Name

Form, model, specifications, dimensional outline, technical performance, and relevant parameters of the equipment

Basic bolt layout detail and civil load

Pump assembly overall layout drawing

Pump structural assembly drawing

Detailed technical specifications

Dimensions and space requirements for the equipment's appearance, installation, and maintenance operation.

Instruction Manual or Equipment List

Sludge Screw Pump Technical Data Sheet

Supply List (including name, quantity, specifications, performance parameters, material, origin)

Installation, operation, and maintenance manual for the equipment

Material: 304 Stainless Steel

Stepless Variable Speed

Variable frequency drive installation and usage