Anhui Shengshi Datang Graphite Equipment Co., Ltd. specializes in the following main products: graphite heat exchangers, graphite condensers, graphite heat exchange units, graphite film evaporators, and graphite dilution coolers, etc.
The YKC-type round block hole vertical graphite heat exchanger is a type of graphite heat exchanger with superior performance. The cylindrical heat exchange blocks are made with standard unit blocks, offering high structural strength. They employ PTFE O-rings for medium sealing within the structure and incorporate a pressure spring for automatic compensation against thermal expansion and contraction. Features include short channels and an increased redistribution chamber to enhance turbulence effects, resulting in a heat exchanger with high structural strength, strong resistance to temperature and pressure, good shock resistance, high heat transfer efficiency, long service life, and ease of maintenance.
Technical Features
Design Temperature: -20~165℃ (can be increased to 240℃ for use as a heater)
Design Pressure: Atmospheric pressure ~ 0.4 MPa (Also available in custom designs and manufacturing up to 1.8 MPa pressure to meet customer requirements)
Heat Exchange Area: 2-500 square meters (can also customize models from 500-800 sqm)
Standard: HG/T3113-1998 "YKA Type Circular Hole Graphite Heat Exchanger"
Usage:
This series of products can be used as heaters, coolers, and condensers. A gas-liquid separator is required when used as a condenser.
【Equipment Advantages】
In addition to the advantages of the YKA series, the following features are also present:
1) Graphite heat exchange blocks feature no central hole, with water holes running directly from one side to the other, and material holes are evenly distributed throughout the heat exchange block, enhancing material utilization.
2) Graphite blocks have only one sealed surface around the outer circumference, whereas the YKA series features two sealed surfaces both inside and out, which are more prone to seal failure. This greatly facilitates processing and maintenance.
3) Equipment with the same heat exchange area has a smaller volume than YKA, making it more compact.
4) Capable of manufacturing larger-sized equipment.
5) Can be designed for multi-process, vertical, and horizontal usage
