Aerobic Double-Control Oven/Air-Tight Drying Oven Features:
The manufacturing of oxygen-free ovens involves the use of argon arc welding for all seams of the stainless steel inner lining, ensuring superior sealing performance. This design facilitates rapid deoxygenation or cooling, contributing to the quality of the product.
Main Application: Meets the requirement for non-oxidative drying in industries such as electronics, sanitation, instruments and meters, factories, universities, and scientific research.
I. Equipment Features
1. Full tungsten arc welding on the inner wall, high-temperature silicone clamp for good airtightness.
2. High-temperature resistance, clean.
2. Compliance and Standards Fulfillment
GB/T11158-1989 Technical Conditions for High-Temperature Test Chambers
GB2423.2-1989 Test B
Section 3: Equipment Usage
The anaerobic oven is suitable for electronic liquid crystal displays, LCDs, CMOS, ICs, and research and laboratory departments.
The anaerobic oven can also be used for drying, heat treatment, aging, and other high-temperature tests on non-volatile and non-flammable, non-explosive items.
4. Equipment Technical Parameters
Name and Model: Oxygen-Free Oven
2. Key Technical Specifications:
2.1 Oxygen Concentration: ≤0.5%
2.2 Temperature Range: RT (Room Temperature) +10 to +250℃
2.3 Temperature Deviation: ≤±2.0℃
2.4 Heating Rate: ≥3~5℃/min (average measurement throughout the process under no-load condition)
3. Case Structure:
3.1 Container Material: The outer box is made of SS41# medium carbon steel plate, treated with phosphoric acid salt film, and coated with two layers of anti-glare paint after baking.
3.2 Interior Material: SUS304# Non-magnetic Mirror Stainless Steel
3.3 Insulation Materials: Ultra-fine glass wool
3.4 Exhaust Port: φ50
3.5 Separator: 2 layers, stainless steel square tube, load-bearing capacity of about 30KG.
3.6 Air Circulation Unit: High-capacity axial flow motor
3.7 Heating Method: Stainless steel electric heater
4. Temperature Control System
4.1 Temperature Measurement Sensor: Pt100 Platinum Resistance
4.2 Control Instrument: Imported digital temperature controller, PID adjustment, control accuracy 0.1℃.
4.3 Over-temperature Protection Gauge: An independent over-temperature protection system from the main control of the workshop, ensuring the safety of the test items.
4.4 Control System: Main electrical components are made with imported components from Schneider, Omron, and other brands.
