1. Treatment of Gaseous Fuels
(1) Emission of gaseous fuels: If the discharge volume is substantial, choose a location with minimal human presence as much as possible. Be aware of fire restrictions in the area and have appropriate fire extinguishers, sand, and water on standby.
(2) When releasing flammable gases from the cylinder, the staff should stand on the side of the exhaust port to operate, to prevent the gas from being ejected and harming people.
(3) When using catalytic combustion for treatment, a pressure-reducing valve should be installed to control the flow rate of the combustible gas, allowing it to be released slowly to ensure complete combustion within the combustion unit.
2. Treatment of assist gases
(1) Remove all powders, petroleum, oils, and flammable materials adhered to container valves or utensils. Clean the base thoroughly before proceeding with the treatment of the oxidizing gas.
(2) Waste Gas Treatment Companies Remind Everyone: It is strictly prohibited to process combustible gases and flammable gases in the same or nearby locations to prevent accidents.
(3) No ignition sources, combustible materials, or objects should be present in the vicinity of the gas-assist gas handling area.
The waste gas treatment company points out that the main components of these emissions include carbon oxides, sulfur oxides, ammonia, benzopyrene, CO, CH4, etc. The Huaibei RCO catalytic combustion units, some of which also contain harmful substances such as cadmium and lead from coal, can cause significant harm to the environment and human health.
3. Coal-to-Oil Process Emissions: Coal liquefaction can be categorized into direct and indirect liquefaction. During direct coal liquefaction, through hydrogenation reactions and the use of an RCO catalytic combustion unit, all heteroatoms are essentially removed. The RCO catalytic combustion unit ensures no particulate matter, and sulfur recovery yields elemental sulfur, with most nitrogen converting to ammonia.
2. Water Spray + Dry Filter + Activated Carbon Adsorption + Catalytic Combustion
This process is commonly used for paint spraying and baking paint VOCs emissions, with the main pollutants being benzene, toluene, and total VOCs.
The organic waste gas, after being acted upon by the fan, is first passed through a water spray to remove most of the paint mist before entering a dry filter. The dry filter not only removes moisture from the gas but also further intercepts some particulates, protecting the subsequent activated carbon treatment facility. The pre-treated gas then enters the activated carbon adsorption box, where organic substances are trapped within through adsorption. The treated gas meets the standards and is released into the atmosphere through a chimney.
Rco Catalytic Combustion Unit Price - Provided by HaoRuiCheng Environmental Protection Co., Ltd. HaoRuiCheng Environmental Protection Co., Ltd. is a company specializing in "air pollution control including organic waste gas treatment, inorganic waste gas treatment, and dust removal treatment." Since its establishment, we have adhered to the policy of "honesty first, stable operation," actively participating in healthy market competition, and ensuring the "HaoRuiCheng" brand enjoys a good reputation. We uphold the principle of "customer service first, user satisfaction first," which has helped HaoRuiCheng Environmental Protection win customers' trust and establish a positive corporate image. Special Note: The images and information provided here are for reference only. Please contact us for accurate information. Thank you!
