Rebar mesh, also known as welded wire mesh, is primarily used for road surfaces, highway surfaces, railway surfaces, bridge pavements, tunnel linings, floors, walls, and more. The application of welded wire mesh is extensive due to its main material being ribbed steel, which can reach a yield strength of up to 500N. Theoretically, this standard rebar mesh can replace rebar. Or it can eliminate the time-consuming and labor-intensive manual binding of rebar. Compared to manually bound rebar, rebar mesh offers numerous advantages. Next, I will delve into the details for you.

Several advantages of steel mesh sheets:

Firstly, reduce construction time and improve quality. The steel mesh is a pre-manufactured product at the factory, custom-produced according to the required size specifications. No on-site reinforcement is needed; the construction steel mesh factory delivers it directly to the construction site for installation, saving over half of the construction time. The steel bars are closely spaced, and the welding mesh's longitudinal and transverse bars form a network structure, ensuring solid welding and preventing the occurrence and expansion of concrete cracks. The welding mesh on roadways, floors, and floor surfaces can reduce the formation of cracks on the concrete surface.

Utilize reinforcing mesh to enhance crack resistance

Secondly, mass production yields good economic benefits. The steel mesh is produced in bulk by the factory, as are the raw materials. CRB rebar prices are low but can replace standard rebar. The design strength of the welded mesh rebar is 50% higher than that of standard rebar, and approximately 30% can still be reduced after considering the requirements of some components. Additionally, the processing fee for rebar with a diameter of 12mm or less is about 10% of the material cost. Overall, considering this (compared to standard rebar), it can reduce the cost of the rebar construction project by about 10%.

Reinforcing mesh is formed by low-pressure, high-current welding. After loading or reinforcing bar production, there is minor deformation between the steel wire and the mesh due to small contact. Therefore, when tightening the steel wire ropes, there's no issue with the welding of the mesh due to external force in the torque mesh. However, it can cause slight deformation, affecting the appearance and usage of the construction mesh.

Bridge steel mesh is produced under factory quality control through automated and intelligent production lines, controlling the size, specification, and quality of the steel mesh. It avoids the leakage, instability, errors, and shoddy construction associated with manual tying. The bridge deck steel mesh features large size, high elasticity, even spacing, high precision, and strong weld points. As a result, the quality of the engineering project is significantly improved.

The production of steel mesh can be simply divided into three processes: raw material wire welding into a mesh. Next, let's briefly understand these three processes:

Material Selection: The choice of raw materials for steel mesh generally depends on the diameter. At Dongying Steel Mesh Factory, standard brand rebars such as CRB550 (cold-rolled ribbed), HPB300 (hot-rolled round), and HRB400 (hot-rolled ribbed) are typically selected for standard steel meshes. For custom steel meshes, the raw materials can be selected based on the mesh diameter, usually including round, low-carbon steel wire, and wire.

Wire Rod Straightening: The process of wire rod straightening is generally...

Welded Mesh: This step involves welding the mesh, of course, at the welding station. Bridge reinforcing mesh factories have various welding machines. Smaller areas and thicker diameter meshes can be welded with a small welding machine, while meshes with a size of 4-6 should be焊接 with a large welding machine. When you want to weld 8 or more meshes, you should opt for a larger welding machine.

Bridge Reinforcement Mesh Factory - Dongying Reinforcement Mesh Factory - Zhengda Metal Mesh is a leading manufacturer provided by Jinan Zhengda Metal Mesh Manufacturing Co., Ltd. "Electric Weld Mesh, Reinforcement Mesh, Mesh Fabric, Insulation Nails, Perforated Mesh, Various Screening Meshes" Choose Jinan Zhengda Metal Mesh Manufacturing Co., Ltd., located at: No. 1 Weizhuang, former Jinan Paint Factory, Jinan City, Shandong Province. For many years, Jinan Zhengda has been committed to providing excellent service to our customers. Contact: Manager Li. Welcome to call, write, or visit for business discussions. Jinan Zhengda looks forward to becoming your long-term partner!