Glass Fiber Self-Adhesive Tape
Purpose: Repairing drywall, joint gaps in gypsum board, cracks in various wall structures, and other wall damages
Key Performance: Excellent alkaline resistance, high tensile strength and resistance to deformation, crack prevention, non-degradation, non-foaming, self-adhesive properties.
No pre-bottom coating required; quick and easy application.
Specification: 8×8.9×9 meshes per inch, 55-85 grams per square meter.
Width: 25-1,000mm; Length: 10-153m.
Color: Typically white.
Construction Method:
Maintain the wall in a clean and dry condition.
Apply tape over the cracks and press firmly.
3. Ensure the gaps are covered with tape, then cut off the excess tape with a knife, and finally apply the mortar.
4. Allow it to air dry, then gently buff.
5. Apply ample paint to achieve a smooth surface.
6. Trim any excess tape. Next, fiber mesh price, ensure all cracks have been properly repaired, and finish the patched area with fine composite material to make it look smooth and new.
Mesh fabric has a high node strength; that is, when the mesh fabric is subjected to tension and the nodes slip, Jinzhou fiber mesh fabric, fine cracks will appear in the initial stage of force application. Therefore, to test the node strength at the right time, a piece of glass fiber fabric, 330mm x 50mm in size, should be cut for testing. The strip of glass fiber fabric used for testing can only be taken in the weft direction, and then only the central weft thread is left among all the threads removed. After 50mm, that thread is shortened, and then a tensile test is conducted. Generally, the external wall thermal insulation system requires the node strength of glass fiber mesh fabric to be ≧3.2N per thread.
Exterior Wall Insulation Mesh Construction Technique and Method Introduction: The insulation material glass fiber mesh is made from glass fiber woven fabrics as the base material, coated with a high molecular weight anti-alkali coating. This results in excellent alkaline resistance, flexibility, and high tensile strength in both warp and weft directions. The fiber mesh can be used for the insulation, waterproofing, and crack resistance of the inner and outer walls of structures. The glass fiber mesh primarily uses alkali-resistant glass fiber mesh, which is made from alkali-free glass fiber yarn (mainly composed of silicate, with good chemical resistance) woven into a special structure—lace weave. It is then heat-set at a low temperature with anti-alkali liquids and reinforcing agents. The main application of the exterior wall insulation mesh is widely used in wall reinforcement materials, such as glass fiber wall mesh, GRC wall panels, EPS external and internal wall insulation boards, gypsum boards, waterproof felt, asphalt roof waterproofing, fire-resistant boards, and construction sealant tapes, etc.
Fiber Mesh Fabric Factory - Zhengda Metal Sieve Large Factory Quality - Binzhou Fiber Mesh Fabric supplied by Jinan Zhengda Metal Sieve Manufacturing Co., Ltd. Striving Forward, Moving Forward. Jinan Zhengda Metal Sieve Manufacturing Co., Ltd. is committed to becoming a strategic partner for win-win, co-existence, and joint progress with you, and is determined to become a competitive enterprise in metal wire mesh, soaring together with you towards success!
