
Method of using auger blades:
Screw auger blades are one of the critical components in agricultural machinery. To achieve optimal performance, the following measures should be taken:
1. Ensure assembly quality. Improper assembly of the auger blades as components can affect performance.
2. Selection of lubricants and additives. The auger blades are used frequently, so it is necessary to regularly add lubricant to ensure smooth operation, and to choose appropriate additives to maintain the high performance of the auger blades.
3. Establish corresponding maintenance systems. When maintaining agricultural machinery, pay attention to the condition of the auger blades and replace worn parts promptly.
Method to clean the impeller blades:
1. Descaling. To remove scale from cast iron, mix 8-10% hydrochloric acid with 3% of an inhibitor solution equivalent to the acid amount, heat to 50-60°C, then inject into the water jacket. Soak for 2-3 hours before draining. Subsequently, clean with a potassium dichromate solution or inject 5% lye solution into the water jacket to neutralize the remaining acid. Rinse with clean water several times until completely clean.
2. Use caustic soda solution for descaling. To remove dirt primarily composed of silicate, add a 2-3% caustic soda water solution to the cooling system. Wait for 1-2 days after the locomotive operation, then drain and rinse with clean water. Repeat this process once and clean the cooling system with fresh water.
The auger blades operate normally and are durable. These advantages make them widely used, especially as an essential component. Their functionality is also instrumental in the extensive application of agricultural machinery.































