German SCHMIDT yarn tension gauge ETPB-100Zero-point adjustment is permitted in various tension gauge measurement scenarios to ensure measurement accuracy. Calibration for two different materials can be performed based on the materials provided by the customer. An integrated material diameter compensator is included, for modelsDTS-5000In tension gauges with higher measurement ranges, the precision after varying the diameter is improved. For online use, the mounting holes allow for a fixed installation.
The ETPT tension gauge can be connected to a PC via USB for continuous reading monitoring on the PC.
Memorize 60,000 readings
Operators can choose from 5 different storage modes:
Pattern S:Show statistics for each series only
Model H:Store XY charts for review after completing a series of measurements
Mode C:Continuously record within the user-defined time frame.999 Series Measurement (2 Hz)
Model F:At a higher sampling rate (200 Hz), it is C.
Pattern D:Store individual readings and statistical information
| Calibration: | Based on SCHMIDT factory procedures |
| Accuracy: | ±1% of full scale ±1 digit or better (typical ±0.5% of full scale) |
| Measurement Unit: | CN, G, N, or lb, switchable |
| Out of Scope: | Approximately10% full scale, accuracy not guaranteed |
| Overload Protection: | 200% full scale |
| Measurement Principle: | Strain Gauge Bridge |
| Roll Deflection Measurement: | 0.5mm |
| Signal Processing: | Digital |
| Damping: | Adjustable electronic damping, average |
| Internal sampling rate: | Approximately1 kHz |
| Sampling Rate: | 200 Hz, 2 Hz: AVG, Small |
| Display: | Color TFT 128 x 160 |
| Display Update Rate: | Approximately2 times per second |
| Memory: | After, Average, MAX, MIN |
| Temperature Coefficient: | Gain: Full scale/°C less than ±0.01% |
| Temperature Range: | 10 - 45 degrees Celsius |
| Relative Humidity: | Relative humidity 85% |
| Automatic Shutdown | ApproximatelyNo use within 3 minutes |
| Power Supply: | LiPo battery (operates for about 20 hours on a single charge, takes about 3.5 hours to recharge) USB AC Adapter with 4 Adapters, 100-240 V AC (EU/USA/UK/AUS-NZ) |
| Building Materials: | Aluminum |
| Dimensional drawing | ViewDimensions |
| Net Weight (Gross Weight): | Approximately310g (1220g) |
ETX models in other specifications
| Output Signal: | USB |
| Memory: | At 999 measurement cycles, it is 60,000. |
| Memory Mode: | 5 storage models with statistical evaluation and PEAK capture |
