Schmidt Tensiometer DTS-5000The tension gauge allows for zero-point adjustment in various measurement scenarios to ensure measurement accuracy. Calibration for two different materials can be performed based on the materials provided by the customer. An integrated material diameter compensator is included, for modelsDTS-5000In tension gauges with higher measurement ranges, improve the accuracy after varying the diameter. To facilitate online use, the mounting holes allow for a fixed installation.
| Model | Tension Range | Resolution | Measuring Head Width* | Applications Textile Industry e.g Yarn Count | Applications Wire Industry e.g. soft-annealed Copper Wire | SCHMIDT Calibration Material PA** | SCHMIDT Calibration Material soft-annealed copper wire*** | Material- Thickness Compensator |
| DTX-200 | 1 – 200.0 cN | 0.1 cN | 66 mm | max. 200 tex | max. 0.15 mm Ø | 0.12 mm Ø | 0.10 mm Ø | |
| DTX-500 | 1 – 500.0 cN | 0.1 cN | 66 mm | max. 500 tex | 0.05 – 0.25 mm Ø | 0.12 + 0.20 mm Ø | 0.16 + 0.25 mm Ø | X |
| DTX-1000 | 10 – 1000 cN | 1 cN | 66 mm | max. 1000 tex | 0.10 – 0.40 mm Ø | 0.20 + 0.40 mm Ø | 0.25 + 0.40 mm Ø | X |
| DTX-2000 | 20 – 2000 cN | 1 cN | 66 mm | max. 2000 tex | 0.30 – 0.60 mm Ø | 0.40 + 0.70 mm Ø | 0.40 + 0.60 mm Ø | X |
| DTX-2500 | 25 – 2500 cN | 1 cN | 116 mm | max. 2500 tex | 0.30 – 0.70 mm Ø | 0.40 + 0.70 mm Ø | 0.40 + 0.60 mm Ø | X |
| DTX-4000 | 40 – 4000 cN | 1 cN | 66 mm | max. 4000 tex | 0.35 – 0.90 mm Ø | 0.50 + 0.80 mm Ø | 0.50 + 0.80 mm Ø | X |
| DTX-5000 | 50 – 5000 cN | 1 cN | 116 mm | max. 5000 tex | 0.40 – 1.00 mm Ø | 0.60 + 1.20 mm Ø | 0.60 + 1.00 mm Ø | X |
| DTX-10K | 0.1 – 10.00 daN | 0.01 daN | 116 mm | max. 10000 tex | 0.70 – 1.40 mm Ø | 0.80 + 1.40 mm Ø | 0.80 + 1.20 mm Ø | X |
| DTX-20K | 0.2 – 20.00 daN | 0.01 daN | 166 mm | max. 20000 tex | 1.00 – 2.00 mm Ø | 1.20 + 1.80 mm Ø | steel rope 1.5 mm Ø steel rope 2.0 mm Ø | X |
| DTX-30K | 0.3 – 30.00 daN | 0.01 daN | 216 mm | max. 30000 tex | 1.20 – 2.50 mm Ø | 1.40 + 2.00 mm Ø | steel rope 1.5 mm Ø steel rope 2.5 mm Ø | X |
| DTX-50K | 0.5 – 50.00 daN | 0.01 daN | 216 mm | max. 50000 tex | 1.40 – 3.00 mm Ø | steel rope 1.5 mm Ø (7 x 7 x 0.2) | steel rope 2.0 mm Ø (7 x 7 x 0.3) | |
| DTX-60K-V1 | 0.6 – 60.00 daN | 0.01 daN | 280 mm | max. 60000 tex | 1.80 – 3.50 mm Ø | steel rope 2.0 mm Ø (7 x 7 x 0.3) | steel rope 2.5 mm Ø (7 x 7 x 0.4) |
