Wastewater Treatment Filtration Machine Features:

1. The rake grid descends after passing, while the grid ascends to remove slag, ensuring no slag is pulled into the water; slag removal is thorough.

2. With a substantial amount of bottom sediment (silt, gravel) present, the rake will not clog, thus preventing accidents.

3. Reliable operation program, low failure rate.

4. Fully assembled and debugged before shipment, easy to install.

5. During maintenance, the grate can rotate around the underwater pivot point to emerge above the water surface, making maintenance easy.

★ LHG Type Chain Grating Cleaning Machine: Purpose, Working Principle, and Structure

1. The anti-siphon grille is primarily used at intake ports, before pump stations, especially in areas with significant sediment accumulation. It is designed to intercept and retrieve debris in water, commonly serving as medium or coarse grilles.

2. The rake is fixed to the chain, which runs along the guide rail. The Fengtai cleaning machine's rake descends from the rear of the grate, runs from the bottom to the front of the grate, and捞取被grate拦住的floating debris from below to above, guided by the baffle to the discharge point, where it is unloaded into the slag truck.

3. The Fengtai Cleaning Machine's reverse recovery grating is mainly composed of the frame, traction chain, transmission system, tooth rake assembly, and underwater guide wheel assembly.

★ Features of the XQ Type Recirculating Rake Cleaning Machine:

1. No grille, numerous small tines interconnect to form a massive rotating surface, ensuring thorough slag removal.

2. Equipped with overload protection, reliable operation.

3. Effective slag removal achieved through variation in operational track.

4. Minimum gap of 1mm, typical of fine mesh grating.

5. High tensile strength tines available in nylon and stainless steel options.