




Product Features
Utilize intelligent integrated control
Easy Installation: Wall-mounted installation, DN200-1500
Well equipment requires no maintenance
Space requirements are minimal: Can be installed vertically or horizontally.
Aesthetically pleasing: Unlike traditional opening and closing mechanisms, it does not protrude from the ground.
Measures are well-designed for easy maintenance, convenient use, and extended lifespan, with the flexibility to choose any drive unit.
Multiple control modes: manual, automatic, remote, emergency operation
Upgradable gate seat sealing surface, capable of scraping off adherent material from the sealing surface, and automatically removing debris.
The gate body is sturdy and durable, with reinforced rib design for increased body strength. The direct current channel design ensures no sedimentation or blockage, offering a wider range of adaptability.
Valves and frames are made of SUS304 material.
Product Composition
The hydraulic flow limiter consists of a throttle gate, hydraulic cylinder, and hydraulic opening and closing system. It features a simple structure, easy maintenance, light weight, and can be used in any direction, with the added benefit of remote operation. The hydraulic operation is achieved by providing pressure to the cylinder from an external pump station, where the cylinder is connected to the gate to facilitate its opening and closing.
Flow Control Valve
The hydraulic flow control gate, also known as the liquid-driven flow control gate or liquid-regulating gate, is primarily made of stainless steel SUS304 material with a rubber soft seal. It features light weight, flexible operation, corrosion resistance, no rust, easy installation and maintenance, and reliable sealing. It is widely used in waterworks, wastewater treatment plants, drainage and irrigation, flood control, environmental protection, reservoirs, rivers, and other projects for the purposes of cutoff, flow regulation, and water level control.
Stainless steel gates offer the following advantages:
Lightweight: Approximately 1/3 the weight of a standard gate.
2. Corrosion-resistant: Resistant to acids, alkalis, and most corrosive chemicals, as well as sewage and seawater. 3. Good sealing: Equipped with rubber soft sealing for excellent sealing performance.
4. Torque is low: Due to the light weight of the gate plate and the low frictional resistance between the gate plate and the guide plate, the operating torque is low.
5. Long lifespan: The gate and guide rail are equipped with a anti-locking structure, resulting in minimal wear on the sealing surface.































