The Rotating Rake Cleaning Mechanism is assembled into a rotating grate chain with a unique rake tooth design. Driven by a motor reducer, the rake chain performs a reverse water flow rotational movement.

As the rake chain reaches the top of the equipment, guided by the groove wheel and curved track, each rake tooth generates a relative self-cleaning motion. Most solid materials fall off due to gravity. The remainder is cleaned off the rake teeth by the sweeping device's reverse motion.

Rake chain similar to a grate in the direction of water flow; the gap between the rakes mounted on the rake chain shaft can be selected according to the operating conditions. After the rakes separate solid suspended particles from the fluid, it ensures smooth water flow. The entire working process is continuous, or it can be intermittent.

Product Features

The equipment's major advantages include high automation, high separation efficiency, low power consumption, noiseless operation, and excellent corrosion resistance. It can operate continuously and stably without human supervision, equipped with overload safety protection that automatically shuts down the machine in case of a fault, preventing overloading. The device can be adjusted to any operating interval as per user requirements for periodic operation; it can automatically control based on the liquid level difference before and after the grate; and it also features manual control for ease of maintenance. Users can select it according to different operational needs.

Due to the rational structural design of the equipment, it possesses strong self-cleaning capabilities during operation, preventing clogging. Consequently, the daily maintenance workload is minimal.

Technical Specifications

1. Equipment and Tine Specifications

Equipment specifications are divided into GSLY300-3600 models based on the machine width. Machine width

Over 1800mm, the unit is made in parallel configuration. Rake tooth gap is available in various specifications such as 1mm, 3mm, 5mm, 10mm, 20mm, 30mm, 40mm, 50mm, etc. Selection is based on flow rate, lifting height, total solid-liquid separation, and the shape and particle size of the material being separated, with different materials available for selection.

2. Equipment Length and Width Specifications

The standard groove depth of the equipment is 1535mm and can be extended arbitrarily according to the user's needs and actual usage. Special specifications are designed separately.