Foshan Limai Electromechanical Co., Ltd. (0757-22817124) is the Foshan General Agent of Taiwan Jaguar Air Compressors. It is a wholly-owned subsidiary of Xiamen Dongya Mechanical Industry Co., Ltd., serving enterprises in Foshan, Guangdong. With over 20 years of air compressor experience, we have always adhered to the philosophy of "Continuous Improvement." We possess technically trained and rigorously examined personnel to provide superior after-sales service. We specialize in air compressor systems, variable frequency air compressor retrofitting (saves electricity for you), waste heat recovery projects, design, and pipeline engineering installation. Our main products include Jaguar air compressors, Jaguar permanent magnet screw machines, permanent magnet variable frequency screw machines, screw compressors, Jaguar two-stage compression permanent magnet variable frequency screw air compressors, air compressors, desiccant dryers, air storage tanks, screw machine maintenance and repair, screw machine maintenance supplies, air compressor repair, Jaguar vacuum pumps, Jaguar blowers, and Jaguar oxygenators.
Shunde Beijiao Jaguar Air Compressor Repair, Shunde Lengjiao Jaguar Air Compressor Maintenance, Shunde Liezhou Air Compressor Major Repair, Shunde Ronggui Air Compressor Main Unit RepairShunde Chenchun Jaguar Air Compressor MaintenanceVarious brands of air compressor accessories
Section 1: Maintenance and Care for the Air Intake Filter Core
The air filter is a component that removes airborne dust and impurities. The filtered clean air then enters the screw rotor compression chamber for compression. Since the internal clearance of the screw compressor only allows particles of 15u or less to pass through, if the air filter element becomes clogged or damaged, a large number of particles larger than 15u will enter the screw compressor's circulation. This not only significantly shortens the service life of the oil filter and fine oil separator cores but also causes a large number of particles to enter the bearing cavity directly, accelerating bearing wear, increasing the rotor clearance, reducing compression efficiency, and even causing the rotor to seize due to dry friction.
2. Replacement of the oil filter.
Section 3: Maintenance and Replacement of Oil Fine Separator
Four: Maintenance and Replacement of Screw Oil.
The quality of the screw oil is crucial for the performance of the injection screw machine. Good oil has excellent antioxidant stability, rapid separation, good degassing properties, high viscosity, and good corrosion resistance. Therefore, users must use the genuine screw oil provided by our company.
V. Maintenance of the coolers.
The cooling efficiency of the cooler directly affects the operating temperature of the air compressor. The plate-fin structure is prone to accumulating dust, so the cooler requires maintenance by blowing with dry compressed air of 0.4 Mpa or more from top to bottom after each shift. The cooler for diesel-driven screw compressors is upright, and maintenance involves blowing with dry compressed air of 0.4 Mpa or more from outside in. After blowing, clean the dust and particles inside the air guide cover to prevent them from being blown into the cooler again, which could cause blockage and lead to high machine temperatures. If the machine is used in harsh environments, with the cooler surface covered in oil stains, it is necessary to clean it thoroughly with a carbon deposit cleaner.
