Explosion-proof Cleanroom Fluorescent Lamps 300*600, 600*600, 300*1200, 300*900 Explosion-proof Grille Lamps

Scope of Application and Use:
Suitable for Hazardous Areas in Zones 1 and 2
Suitable for Class II, Groups A, B, T6 and below explosive gas environments
For use as lighting in chemical factory buildings, warehouses, gas stations, oil well platforms, etc. Product features:
The housing is made of aluminum alloy die-casting and features a high-pressure electrostatic powder coating on the surface.
Easier bulb replacement—simply unscrew the end cap and pull out the bulb for replacement.
Tempered glass lampshade, exposed stainless steel fasteners, protective grille cover with galvanized surface and powder coating.
Emergency devices can be installed upon request. In the event of an external power failure, the lighting automatically switches to emergency lighting mode, operating as a single tube during emergencies.
Standard: GB3836.1-2000, GB3836.2-2000. Technical Parameters:
Model Specifications, Rated Voltage, Rated Power, Explosion-Proof Mark, Inlet Specifications, Cable Outer Diameter, Protection Class
BHY20  220V 20W（1×20） ExdⅡBT6 G1/2″ φ6.5～φ11mm IP54
BHY 30  30W（1×30）   
BHY 40  40W（1×40）   
BHY 40  40W（2×20）   
BHY 60  60W（2×30）   
BHY 80  80W（2×40）

3x20w.3x28w.3x36w.3x40w  4x20w.4x28w.4x36w.4x40w 

Emergency Voltage | Emergency Lighting Duration | Charging Time | Emergency Start-up Time | Emergency Power
220V 24h 24h 0.3S 20W（1×20）
    30W（1×30）
    40W（1×40）
Important Reminder:
The product is factory-equipped with T8 fluorescent tubes; no additional purchase is required by the user.
Customers must strictly order according to the model specifications (including the number of bulbs, power, and installation method, etc.).
Please specify any special requirements separately.

Technical Specifications:

Standard: GB3836.1-2000, GB 3836.2-2000, GB3836-3.2000, IEC60079

Ex II CT5

Rated Voltage: 220V

Protection Rating: IP65

Corrosion Resistance Grade: WF2

Lighting source and power configuration:

Single Foot Instant Start Tube Lights: 1x20W, 1x28W, 1x36W

2x20W、2x28W、2x36W

3x20W、3x28W、3x36

LED Sources: 1*9W, 2*9W, 3*9W, 1*18W, 2*18W, 3*18W

Type A Ceiling Mount; 1x20W ~ 1x40W 20x40w、3x20W

B-type Embedded: 2x20W ~ 2x40W

C-type surface mounted: 3x20W~3x40W

D-type embedded: 4x20W - 4x40W

Installation methods for explosion-proof triple-tube fluorescent lamps are A ceiling-mounted, B recessed, C type recessed, and can be customized according to customer

Emergency device required; emergency lighting for 90 minutes, emergency start-up time 0.3S, charging time 24h

Special Note: Three-tube explosion-proof clean fluorescent lamps with Type A installation can be custom-made in stainless steel to meet customer requirements!