The XY-200(YJ) drill rig integrates the main functions and features of popular small drills such as XY-1, XY-1B, and XY-1A on the market. It features the oil-pressure automatic feed from XY-1, the large module gear transmission system from XY-1B, and the high-torque, lightweight rotary drill with a wide speed range from XY-1A, adding a shifting function to the XY-200 model.
▶This drilling machine is suitable forCivil engineering and constructionEngineering geological surveys for structures such as railways, hydropower, transportation, bridges, embankments, etc.Geological core drilling, physical surveying; small grouting holes,Geothermal holesBlast HolesA variety of concrete test holesDrill intoSmall water well drillingSmall pile hole。
▶To broaden the applicability of this machine and cater to the needs of various users, we have introducedStandard TypeXY-200A Drill RigNo relocation capability, no pump function）、Added pump(XY-200 without relocation)A- Type -1 and XY-200 with Transferable Pump FunctionA-2Drill MachineDrill rigs and diesel engines are mounted on the same base. Drilling depth can reach200 meters.
▶Users can choose whether the drilling machine they need comes withAirframeSlurry pumps and whether they require relocation capabilitiesModel TypeSelection.
Drilling Rig Features:
(1) Equipped with an oil-pressure automatic feed mechanism, it enhances drilling efficiency and reduces the physical labor intensity for workers.
(2) Utilize ball card clamping mechanism instead of chuck, equipped with a clamping positioning mechanism for continuous rod reversal without machine shutdown.
(3) Equipped with a bottom hole pressure gauge to indicate pressure, facilitating the understanding of the hole conditions.
(4) Handle concentration, easy operation.
(5) Compact design; drilling and power units are mounted on a single base, occupying minimal space on-site.
(6) Lightweight, highly decomposable, easy to relocate, suitable for both plains and mountainous areas.
(7) Equipped with a safety guard, highlighting the humanized design features of the equipment.
(8) A fixed nut is installed at the connection between the lower end of the oil cylinder and the vertical shaft housing, enhancing the drilling rig's reliability.
Drilling RigRated Drilling Depth200m, depth not to exceed 220m. Nominal bore diameter 200mm，LoamLarge bore diameter permitted300mm. Drilling depth and diameter should be determined based on the stratification conditions.
Drilling Rig Main Technical Parameters:
1. Basic Parameters | Drilling Depth:200、150、100m；Final Hole Diameter:75、91、110mm；Large hole diameter:300 mm；Drill Rod Diameter: 4250 mm，Drilling Angle: 90-75° Drilling Rig Outline DimensionsL×B×H)：1660×780×1560 mm，Drilling machine weight(Excluding the power unit):650kg |
2. Reverser | Active Drill Rod: Hexagonal Grooved46*Φ51*4300mm, Main shaft clamping method: Manual ball retainer Vertical shaft speed(FourFile)：1010,505,236,118 r/min，Axial Travel:450 mm Vertical travel speed at no-load:3 m/s ，Vertical spindle with high downward empty-load speed ：4 m/s Large spindle feed force:15 KN，Large shaft lifting capacity:25 KN |
Hoist | Large lifting capacity(Single Rope): 17 KN，Roller Speed:121,76,36 r/min Roller circumference line speed(Second Layer): 1.05, 0.66, 0.31 m/s，Roll diameter:140 mm Wire rope diameter:10 mm，Wire Rope Capacity:35 m，Brake Drum Diameter:252 mm，Belt Width:50 mm |
4. Oil Pump | Model:YBC-20/125，Rated Pressure:12.5 MPa, Flow Rate:16ml/r, rated speed; 1500 r/min |
5. Mobile Device | Travel of Mobile Cylinder:450mm, Drilling machine distance from hole opening: 300mm |
6. Power Unit | Motor Model:Y160L-4，Rated Power:15 KW，Rated Speed:1460 r/min |
Diesel Engine Model:S1115，Rated Power:16.2KW，Rated Speed:2200 r/min |
Note:.This drilling rig comes standard with a diesel engine.,Also available with an electric motor,Order requirements must be submitted by the customer upon ordering..
Recommended accessoriesDrilling Rig Base and Drill Tower(Select one according to your requirements)：1、T-SJ-3Type A triangular tripod drilling tower2、T2-SJ-3Type two-wheeled trailer-mounted triangular drilling tower3、T-SJ-4Type overall base and four corner tower钻塔4、T4-SJ-4Type 4-wheel trailer base and corner frame drilling tower.5、LP-4T-01-AType track undercarriage and four-leg drilling tower6、LP-4T-01-BType track undercarriage and four corner drilling tower7、LP-4T-02-BType Track UndercarriageHerringbone patternHydraulic Drilling Tower with Landing Gear8、LP-4T-02--B-STRZTType track undercarriage and V-shaped full hydraulic drilling derrick.9、LP-4T-02-B-STZDTType track undercarriage and dual tower folding hydraulic drilling derrick10、LP-4T-02-B-SSTType caterpillar undercarriage and full hydraulic telescopic drilling tower（Highly adjustable）.Notes:Model Plus-SGHydraulic typeRaising-type crawler undercarriage（Load onto the truck）。
Mud pump selection：BW160AType (Single Cylinder)BW200AType(Twin-cylinder.
