The GXY-1B drill rig is a modified version of the GXY-1 model. The main structure change is replacing the fixed drilling frame of the GXY-1 with a sliding frame, and the power head is upgraded from ball-type jaws to hydraulic jaws. It is suitable for engineering geological surveys, general exploration of solid ore deposits, and inspection of blast holes in various concrete structures. Depending on the strata, diamond, hard alloy, or helical drill bits can be chosen for drilling.
Key Features:
1. Drilling rigs feature high input power, substantial output torque, and strong drilling capability.
2. The drilling rig offers a wide range of output speeds, suitable for both engineering geological surveys and diamond core drilling.
3. The drilling rig is equipped with a rotator body that is a single cast piece, enhancing structural strength.
4. Equipped with an oil-pressure feed mechanism and a hydraulic chuck holding device at the top of the vertical shaft, which enhances drilling efficiency and reduces the labor intensity of workers.
5. The power head is equipped with a hydraulic rear displacement feature to clear the hole opening, thereby extending the lifespan of the power head.
6. The drilling rig is equipped with an active drill rod, allowing for non-stop rod reversal with high efficiency and safety.
7. The drilling machine features a double-disc normally closed friction clutch, offering flexible operation and easy adjustment.
8. The drilling machine transmission features an automotive transmission structure, allowing single-handed gear shifting with a locking mechanism for easy operation.
9. Drilling rig and pump are separated, with each equipped with its own power source. This enhances the drilling rig's output torque, particularly during deep-hole drilling, preventing power loss that could lead to conflicts with the pump and avoid accidents inside the borehole.
10. Drill rig features a compact structure, small size, and light weight.Please provide the Chinese content that needs to be translated into American English.Parts availableUp to 100kg, easy to disassemble and transport, suitable for hilly or mountainous areas.
11. Optional large-hole vibrator and control system can be installed as needed, enhancing the ability to handle accidents.
Key Technical Parameters:
Drill rod diameter | 42 mm | |
Drill Rod Clamping Method | Hydraulic Chuck | |
Drilling Depth | Drill Diameter:46mm | 200 m |
Bore Diameter:75mm | 150 m | |
Drilling Diameter:91mm | 120 m | |
Boring Diameter:150mm | 80 m | |
Depth, ApertureForReferenceValue, actual numerical figuresSubject toOn-siteGeological Conditions | ||
Boring Angle | 360° | |
Dimensions (Length)*Wide*High (no Chinese content) | 1800*970*1560 mm | |
Drilling Rig Weight (Excluding Power Unit) | 650 kg | |
Spindle SpeedPositive Rotation | 61；163；338；654 r/min | |
Vertical shaft speedReverse | 45 r/min | |
Vertical shaftPlease provide the Chinese content you would like translated into American English.Torque | 1200 N.m | |
Vertical shaftTheApply pressure | 20 KN | |
Vertical shaftNo Chinese content provided.Lift Force | 25 KN | |
Vertical travel stroke | 500 mm | |
WinchEnhance Capabilities (Single Rope) | 15KN | |
Roller speed | 20，53,109,212 r/min | |
WinchEnhance speed | 0.22；0.59；1.22；2.36 m/s | |
Steel wire diameter | 9.3 mm | |
Wire Rope Capacity | 35 m | |
WinchEnhance Capabilities (Single Rope) | 15 KN | |
Hydraulic Pump | FlowModel:CB-FA10C-FL,Rated Pressure: 16 Mpa,Traffic:10 ml/r,Rated Speed1800-2400 r/min | |
Open hole method,Power head hydraulic rear shift | Travel of mobile hydraulic cylinder：450mm，Drilling machine's distance from the hole mouth：300mm | |
Equipped with power | Electric Motor | Model: Y160M-4, Rated Power: 11 KW, Rated Speed: 1440 r/min |
Diesel Engine | Model:ZS1100, rated power: 12.1KW, rated speed: 2200 rpm | |
Note:.This drilling rig comes standard with a diesel engine.,Also available with an electric motor,The order requirements must be proposed at the time of customer's order.。
Drilling Rig Base and Drilling TowerOptional accessories(Select an option based on your requirements)：1、T-SJ-3Type triangular tripod drilling tower2、T2-SJ-3Two-wheeled trailer-mounted triangular drilling tower3、T-SJ-4Type overall base and four corner pedestal drilling tower.4、T4-SJ-4Type 4-wheel trailer base and corner frame drilling tower.5、LP-4T-01-AType crawler undercarriage and four-leg drilling tower6、LP-4T-01-BType caterpillar undercarriage and four corner drilling tower.7、LP-4T-02-BType caterpillar undercarriageHerringbone patternHydraulic drilling derrick8、LP-4T-02--B-STRZTTracked undercarriage and V-shaped full hydraulic drilling derrick.9、LP-4T-02-B-STZDTType caterpillar undercarriage and double tower folding hydraulic drilling rig.10、LP-4T-02-B-SSTType track undercarriage and full hydraulic telescopic drilling tower（Highly adjustable）Note:Model Plus-SGHydraulic typeElevated Track Undercarriage（Load onto truck）。
Slurry pump selection：BW160AType (Single Cylinder)BW200AType(Twin cylinder.
