KLT 1000 Dry Oil Single Point Automatic Lubricator, Bearing Automatic Greasing Unit

Benefits of using an automatic lubricator

With the development of the industrial and information technology sectors, the trend of mechanized production replacing traditional manual labor is accelerating, and the mechanization of corporate production has already begun to manifest. However, mechanized production also faces the stringent issue of machine maintenance. A common problem among users of machine equipment is a lack of awareness regarding machine maintenance, which is the primary cause of premature machine damage. Most machine users are still employing traditional manual methods for maintenance, and these methods have several characteristics:

1. Lack of specificity in maintenance timing; no fixed schedule for manual care.

2. Incorrect maintenance methods

3. Inadequate maintenance of the critical parts of the machine

4. Man-hour consumption

5. Uncertain of the lubrication condition; excessive or insufficient oil.

6. Downtime for maintenance and repairs reduces production efficiency. From the above characteristics, it can be observed that there are shortcomings and inadequacies in the traditional manual maintenance approach.

The automatic lubricator not only compensates for the shortcomings of traditional manual maintenance, but also demonstrates its own superiority:

1. The machine can be set for timed and quantitative lubrication as required, maintaining the machine in a well-lubricated state.

2. Reduce the cost of purchasing oils.

3. Increase the lifespan of the machine.

4. Reduce machine and equipment maintenance time.

5. Directly boost user earnings.

Comparing the features of traditional manual maintenance with those of an automatic lubricator, it is very clear that the use of an automatic lubricator directly brings benefits to the users of machine equipment. As the saying goes, prevention is better than cure, and in the context of global competition, the reliability of equipment is both a company's competitiveness and an increase in production value is an increase in profit. Therefore, daily equipment maintenance is crucial, and proper lubrication is of utmost importance. Effective lubrication can reduce equipment wear and tear, decrease maintenance costs, and in turn, reduce the operating capital of the company, allowing for more funds to be invested in the company's operations, generating greater profits. Thus, using an automatic lubricator not only saves costs but also generates income, and it is also a symbol of a company's progress.

Bearings diameter 35-48mm, 15-18g of grease per month

Bearings diameter 49-62MM, 18-26g of grease per month

Bearings: Diameter 63-78MM, 26-37g of grease per month

Bearing diameter: 79-87mm, 37-50g of lubricant per month

Bearings diameter 88-105MM, 50-75g grease per month

Bearings diameter 106-120MM, 75-120g lubricant per month

Comparison of Manual and Automatic Greasing

Traditional Lubrication Method:

Human Resources:

1. Manpower hour consumption.

2. Inadequate manual lubrication.

II. Financial Matters:

Increase purchase oil costs.

2. Increased equipment wear due to inaccurate lubrication.

3. Increase equipment upgrade and maintenance costs.

4. Reduce production output.

Automatic Greasing Device Greasing Method:

I. Manpower:

1. Reduces labor hours.

2. Oil can be supplied to the equipment in a timed and measured manner.

Two, Currency:

1. Reduce oil purchase costs.

2. Repair equipment costs can be reduced.

3. Increase equipment reliability.

4. Reduce equipment maintenance time.

Increase production capacity.

6. Accelerate equipment automation.

The saying goes, "Prevention is better than cure," and in the context of global competition, the reliability of equipment is both a company's competitiveness and a determinant of profit. Increasing output means increasing profits, so regular maintenance of equipment is crucial. Among maintenance, lubrication is paramount, as proper lubrication can reduce equipment wear and tear, lower maintenance costs, and thereby reduce the operating capital required by the company, allowing for more funds to be invested in the company's operations, generating greater profits. Therefore, using an automatic lubricator not only saves on costs but also generates revenue, symbolizing a company's progress. How should we determine the amount of lubricant to add to our equipment's bearings? Firstly, consult the lubrication guidelines provided by the bearing supplier, or refer to the following simple setting table: When the operating temperature reaches above 70°C, the amount of grease must be doubled for every 15°C increase. 2. When the bearings are contaminated, such as with dust, moisture, acidic or alkaline environments, the amount of grease must also be doubled. 3. When the bearing load is heavy, such as in cases of vibration or pressure, the amount of grease must be doubled as well.

PULSARLUBE E Automatic Lubricator The PULSARLUBE E Automatic Lubricator is a single-point lubricator. It maintains your machinery every day of the year, 365 days, extending the life of your equipment and enhancing its productivity. A single-point lubricator is a device that prolongs the life of bearings during the production process. The PULSARLUBE E is an electrochemical, automated single-point lubricator variety, designed to ensure a reliable, predictable, and fresh supply of lubricant for industrial applications.

Shenzhen Sanhe Boda has 16 years of experience in the lubrication industry, offering lubrication solutions to enterprises. As an authorized Palsar agent, we source directly from manufacturers, ensuring competitive pricing. Our after-sales service system is comprehensive, and our operations are straightforward and simple. Our commitment to customer satisfaction is what drives us. The Palsar E is a commonly used disposable lubricator. The PULSARLUBE E automatic lubricator delivers its (pre-filled) lubricant by generating inert nitrogen gas under pressure. It uses combustible hydrogen (hydrogen gas) instead of traditional gases, relying on metal/acidic reactions for lubrication.

PULSARLUBE E utilizes inert nitrogen gas controlled by a microprocessor, a technology similar to that used in vehicle airbags.

Features of Automatic Lubricator:

Integrated microprocessor with reliable programmed logic circuit distribution

Simple operation and can be submerged lubricator

4-Level Variable Allocation Rate: 1, 3, 6, 9, 12 months

Export Thread: 1/4" M

Dimensions: 77MM (?3.03") x 112MM (4.41")

Remote Installation: 1M

Automatic Lubricator Description:

Operating Temperature: -20°C to 60°C

Degree of work pressure: 5KG

Slip Capacity: 120CC

Explosion Proof Certificate: EX IA IIB T45, Models E60, E120, E240 (Multi-purpose / High-speed / Food-grade / High-temperature lubricants)

Application of Automatic Lubricators: Generally includes ○Areas that are dangerous or not accessible○During contamination○Insufficient lubricator maintenance personnel○Mechanical equipment with limited space requiring regular oiling.