Product Categories: Damping Spring Damper, Air Spring Damper, Floating Floor Damper, Vibration Absorbing Stud, Wall Vibration Damper, Ceiling Vibration Damper.
Category Introduction:
1. Wall vibration dampers consist of U-shaped frames, damping silicone layers, and screws, offering easy and quick installation. Their unique damping silicone blocks can interrupt the transmission of sound bridges, especially effective in places like factories, machine rooms, equipment areas, bars, KTVs, party venues, and clubs where subwoofers are installed, effectively cutting off various vibrations and sound bridges.
2. The spring ceiling isolator is composed of springs, damping silicone layers, outer frames, and hangers, effectively isolating the ceiling structure between the suspended ceiling and the original floor, thereby providing excellent shock and noise isolation. The ceiling isolator uses high polymer damping shock-absorbing rubber, cast from raw silicone, with a resistance to aging and damping coefficient five times greater than that of the new rubber, ensuring safety and particularly effective in low-frequency shock absorption and noise reduction.
3. The light steel stud for walls is made from high-quality steel, formed using advanced domestic equipment. The standard length of the light steel stud is 3 meters, and it is installed together with the matching stud dampener. The rubber dampener utilizes the principle of soft connection via rubber clips, and it is a vibration-isolation and noise-reduction component made from natural silicone material, which boasts good elasticity and durability. The dampener forms a soft connection between the light steel stud and the wall, cutting off the sound transmission bridge, and effectively suppressing low and high-frequency vibrations. The suspended installation of the light steel stud for walls exhibits significant vibration and noise reduction effects over a wide range of interference frequencies. The damping silicone also provides vibration and noise reduction, particularly suitable for low-frequency solid sound transmission caused by wall vibrations. The product is widely used in wall vibration and noise reduction projects. The vibration-reducing light steel stud structure is simple, occupies minimal space, distributes force evenly, has a low self-vibration frequency, and offers excellent vibration isolation, making it an ideal device for wall vibration and noise reduction.
4. Ground shock absorbers act as a "floating floor" between floors, using the shock-absorbing body to reduce vibration of the structural layers, thereby mitigating the hazards caused by low-frequency floor vibrations. Note that elastic isolation measures should also be employed at the junction of the surface layer and walls to prevent vibration transmission to the walls (common sizes: 120MMx120MMx63MM). Custom sizes according to customer requirements are available.
The above products are applicable to: 1. Decorative and architectural industries: Bars, KTV rooms, recording studios, hotels, inns, villas, offices, conference rooms, studios, performance halls, apartments, cinemas, theaters, and other locations requiring vibration reduction and noise control.
Section II: Industrial Facilities, various machine rooms, equipment, pipelines, machine tools, soundproof rooms, and noise-insulated rooms
Advantages of天花 shock absorbers:
1: The product features a lightweight and aesthetically pleasing design, simple structure, even force distribution, low natural frequency, and excellent vibration isolation, making it an ideal vibration and noise reduction component for suspended vibration equipment and pipelines.
2: Ceiling noise and vibration isolators are essential components for ceiling noise reduction. Their unique damping rubber blocks can cut off the transmission of sound bridges, especially in entertainment venues with subwoofer areas, making them indispensable. Without them, no amount of soundproofing material can isolate the sound within the private rooms. Therefore, they are the most crucial facility in soundproofing projects; they can also be used as hanging rods for pipelines in equipment rooms such as pump houses, controlling the transmission of low-frequency sounds.
The results are highly significant.
Suspension Damper for天花 Applications:
Hotel, bar, lounge, karaoke, disco, KTV, inn, hotel, cinema, gym, fan coil units, water-cooled coil units, fans, fan boxes, air conditioning equipment piping, pump piping, fans, ductwork, gas piping, smoke purification units, large pumps, various water pipes, and other power vibration equipment suspension vibration isolation, vibration-reducing hangers.
Ceiling shock absorber product installation:
1. Ceiling installation
Ceiling suspension light steel keel is used together, with one end of the product connecting to the light steel keel. One end connects to the suspension rod (the length of the suspension rod can be adjusted according to the actual requirement), install the product on each suspension rod, one per actual situation, 2 to 3 per square meter.
2. Wall Installation
One end connects to the light steel stud, the other end connects to the hanger, and it is fixed to the stud with screws. 1 to 2 per square meter.
