Product Categories: Damping Spring Absorbers, Air Spring Vibration Dampers, Floating Ground Vibration Absorbers, Vibration Dampers, Wall Vibration Dampers, Ceiling Vibration Dampers.
Category Introduction:
1. Wall vibration dampers consist of U-shaped frames, damping silicone layers, and screws, offering easy and quick installation. Their unique damping silicone blocks can interrupt the transmission of sound bridges, especially effective in venues such as factories, machine rooms, equipment areas, bars, KTVs, and party places where subwoofers are installed, effectively cutting off various vibrations and sound bridges.
2. The spring ceiling isolator is composed of springs, damping silicone layers, an outer frame, and hanger rods. It effectively isolates the ceiling structure transmission between the suspended ceiling and the original floor ceiling, thereby providing excellent vibration and sound insulation. The ceiling isolator is made of high polymer damping rubber, cast from natural silicone, with a service life and damping coefficient five times greater than that of new rubber. It offers excellent safety and particularly significant low-frequency vibration and sound insulation effects.
3. The lightweight steel studs are made of high-quality steel, formed using advanced domestic equipment. The standard length of the steel studs is 3 meters and they are installed together with the matching stud dampers. The rubber damper for the steel studs operates on the principle of soft connection using rubber clips, and is a shock-absorbing and noise-insulating element made from natural silicone material, known for its good elasticity and durability. The damper creates a soft connection between the lightweight steel studs and the wall, interrupting the sound transmission bridge, effectively suppressing both low and high-frequency vibrations. The suspended installation of the lightweight steel studs demonstrates a significant shock-absorbing and noise-insulating effect over a wide range of interference frequencies. The damping silicone also offers shock-absorbing and noise-insulating properties, particularly suitable for low-frequency solid sound transmission caused by wall vibrations. The product is widely used in wall vibration and noise reduction projects. The vibration-dampening steel stud structure is simple, space-saving, evenly distributed in force, has a low self-damping frequency, and offers excellent shock absorption, making it an ideal device for wall vibration and noise reduction.
4. Ground shock absorbers act as a "floating floor" between floors and layers, using the shock-absorbing body to reduce the vibration of structural layers, thereby mitigating the harm caused by low-frequency floor vibrations. It is important to note that elastic isolation measures should also be used at the junction of the surface layer and walls to prevent the transmission of vibration to the walls (common size: 120MM x 120MM x 63MM). Custom sizes can be made according to customer requirements.
The above products are applicable to: 1. Decorative and architectural industries: Bars, KTV rooms, recording studios, hotels, inns, villas, offices, conference rooms, studios, performance halls, apartments, cinemas, theaters, and other locations requiring vibration reduction and noise control.
Section II: Industrial Facilities, various machine rooms, equipment, pipelines, machine tools, soundproof rooms, and insulation rooms, etc.
Product Advantages of Anti-Vibration Ceiling Mounts:
1: The product features a lightweight and aesthetically pleasing design, simple structure, even load distribution, low natural frequency, and excellent vibration isolation performance, making it an ideal vibration damping and noise reduction component for suspended vibration equipment and pipelines.
2: Ceiling noise reduction and vibration isolators are essential components for ceiling soundproofing. Their unique damping rubber blocks can interrupt the transmission of sound bridges, especially in entertainment venues with subwoofer areas, making them indispensable. Without them, no amount of soundproofing materials can keep the sound confined to the private rooms. Therefore, they are the most crucial facilities in soundproofing projects; they can also be used as hanging rods for pipes in equipment rooms like pump rooms, controlling the transmission of low-frequency sounds.
The results are highly significant.
Tubular shock absorber product applications:
Hotel, bar, lounge, karaoke, disco, KTV, inn, guesthouse, cinema, gymnasium, fan coil units, water-cooled coil units, fans, fan boxes, air conditioning equipment piping, pump piping, fans, ductwork, gas piping, smoke purification units, large pumps, various water pipes, and other power vibration equipment—suspended isolation vibration and vibration-reducing hangers.
Ceiling Damping Mount Installation
1. Ceiling installation
Ceiling suspended light steel keel and joists used together; one end of the product connects to the light steel keel, and the other end connects to the hanger (the length of the hanger can be adjusted according to actual requirements). Install the product on each hanger; one per hanger based on actual conditions, 2-3 per square meter.
2. Wall Installation
The product connects one end to the light steel stud and the other to the hanger, secured to the stud with screws, 1 to 2 per square meter.
