Product Introduction:

This product is an environmentally friendly water-based cleaning agent designed specifically for the environmental requirements of the electronic cleaning industry as an electronic cleaning chemical. This product is mainly designed for cleaning furnace fixtures, furnaces, reflow soldering condensers, residual rosin, and oil stains. It is a multi-purpose water-based environmentally friendly cleaning agent with extraordinary rapid dissolution and cleaning power for rosin oil stains. It is safe and environmentally friendly to use during the cleaning process, and does not pose any health hazards to the operators. It does not damage the components and can quickly remove various flux residues and oil stains. It can quickly achieve ideal cleaning effects on various new and old scale residues. Easy to rinse, leaving no residue after rinsing with clean water

Compared to traditional alcohol solvent cleaning agents, alcohol solvent based cleaning agents have poor cleaning effects, fast evaporation, strong odor, are flammable and explosive, pose significant health hazards to operators, and pose great risks to the working environment. Therefore, alcohol solvent based cleaning agents are gradually being phased out in the electronic cleaning industry, and safer and more environmentally friendly water-based environmentally friendly cleaning agents are being used insteadinstead of

Features and advantages:

1Before cleaning: Place the furnace carrier and disassembled parts in the cleaning box, and then use water-based environmentally friendly cleaning agentJRS-518Pour it into the cleaning box and soak it. The cleaning agent should cover the surface of the component.

2Ultrasonic waves have heating function to set the cleaning temperature at43℃, for cleaning activity, cleaning timeDepending on the degree of pollution caused by rosin oil stains。

3Rinse:Rinse the cleaned furnace carriers and disassembled parts with tap water once to prevent residue.

4Drying method:The drying temperature is set to70℃, drying time is5-10Minutes).

Note: Due to varying degrees of contamination from residues, the cleaning time also varies accordingly! According to the degree of contamination of the cleaning material, the soaking time can be delayed or reduced. Ultrasonic heating has a better cleaning effect, which will accelerate the cleaning speed and effectiveness. (The temperature of the cleaning box with heating function is set at 4 degrees Celsius.)3Around ℃. As the pollution level of the cleaning agent increases, the cleaning ability also decreases. The cleaning agent will be replaced with a new cleaning solution according to the degree of pollution or turning black.

Packing:

JRS-518 Commercially available specifications are20Standard packaging per liter/barrel.

JRS-518 For non hazardous materials, No special labeling is required.

Storage:

JRS-518It should be stored in the original sealed container and kept in a cool and well ventilated chemical warehouse

Do not freeze this product, avoid direct sunlight or high heat, keep away from immiscible materials, and do not stir before use.

Do not mix the remaining cleaning agent with unused cleaning agent and seal the container. Keep the container sealed and store the cleaning agent for a long time (not exceeding from the date of self-made)24It is advisable to check before use (months).

Please refer to the Material Safety Data Sheet for more recommended information.

Hazard identification:

Please read the Material Safety Data Sheet before using this product. This product is a non hazardous chemical and does not require special labeling.

Please operate and handle this product according to the regulations in the Material Safety Data Sheet.