Product Name | Comparable specifications | Specs | Primary Application | ||
GB | JIS | AWS | |||
JM-49 | ER-49-1 | - | - | 0.8-1.6 | Suited for structural welding, with slightly enhanced resistance to oxidation and rust scale, and lower sensitivity to porosity, suitable for full-position welding. |
JM-52 | ER50-2 | - | ER70S-2 | 0.9-1.2 | Ideal for full-position welding on piping fittings, containing elements such as Ti, Al, Zr, and boasts superior mechanical properties. |
JM-53 | ER50-3 | YGW16 | ER70S-3 | 0.9-1.2 | Suitable for high-speed welding applications requiring smooth and delicate welds on thin sheet metal and similar workpieces. |
JM-54 | ER50-4 | YGW12 | ER70S-4 | 0.8-1.6 | Ideal for high-speed welding of thin plates like sheet metal and general structural components, capable of full-position welding. |
JM-56 | ER50-6 | YGW12 | ER70S-6 | 0.8-2.0 | Suited for structural welding, with moderate resistance to corrosion and slightly lower sensitivity to porosity, suitable for all-position welding. |
JM-70 | ER50-6 | YGW12 | ER70S-6 | 0.8-2.0 | Ideal for structural welding, with moderate resistance to oxidation and rust, low sensitivity to porosity, suitable for all-position welding. |
JM-57 | ER50-7 | - | ER70S-7 | 0.8-1.6 | Ideal for galvanized steel plates used in welding containers, construction, etc., exhibits excellent resistance to porosity and minimal spatter, suitable for full-position welding. |
JM-58 | ER50-G | YGW11 | ER70S-G | 1.0-1.6 | Ideal for high current welding; containing appropriate alloy reduces spatter, refines grain structure, and enhances impact toughness. |
JM-60 | ER55-D2Ti | YGW21 | ER80S-G | 0.8-1.6 | Suited for high-strength steel welding suitable for 55-60 kg grade, such as bridges, pressure vessels, and construction. |
JM-68 | ER55-G | - | ER80S-G | 1.0-1.6 | Ideal for high current welding on steel grades suitable for 55-60kg, containing appropriate alloys to reduce spatter, refine grain structure, and enhance impact toughness. |
JM-53Z | GB:T5118 | YGW16 | ER70S-3 | 0.9-1.2 | Uncoppered gas shielded welding wire, stable wire feeding during welding, minimal spatter, reduced copper fume and dust, less copper slag clogging, otherwise the same as JM53. |
JM-56Z | ER50-6 | YGW12 | ER70S-6 | 0.9-2.0 | Uncoated gas shielded welding wire, offers stable wire feeding, less spatter, reduced copper fume, and less copper chip clogging. Similar to JM56 in all other aspects. |
JM-70Z | ER50-6 | YGW12 | ER70S-6 | 0.9-2.0 | Uncoated gas shielded welding wire, stable wire feeding, minimal spatter, reduced copper dust, less copper chip blockage, similar to JM70. |
JM-58Z | ER50-G | YGW11 | ER70S-G | 1.0-1.6 | Uncoated gas shielded welding wire, with stable wire feeding, less spatter, reduced copper dust, minimizing copper slag blockage, the rest is the same as JM58. |
JM-60Z | ER55-D2Ti | YGW21 | ER80S-G | 0.8-1.6 | Uncoated gas shielded welding wire, with stable wire feeding, less spatter, reduced copper dust, minimizing copper slag blockage, similar to JM60 in all other aspects. |
JM-100 | ER69-1 | - | ER100S-1 | 0.8-1.6 | MIG welding wire, suitable for welding ship hull structures and also for high-strength, important structural steel with a Rel greater than 590 MPa. |
JM-100C | ER69-3 | - | ER100S-G | 0.8-1.6 | Welding for high-intensity coal mine hydraulic supports, also suitable for welding of high-intensity structural steel with a Rel greater than 690MPa. |
JM-110 | ER76-G | - | ER110S-G | 0.8-1.6 | Welding applicable to steel, such as piping components for high-pressure equipment in shipbuilding, petrochemical, and nuclear power plants. |
Lincoln Product Name | Comparable specifications | Specs | Primary Application | ||
MIG | TIG | GB | AWS | ||
MIG-307LSi | JGS-307LSi | ER307LSi | ER307LSi | 1.0-5.0 | Weldability, iron fluidity, and bead shape are superior to ER307. |
MIG-307HM | JGS-307HM | 1.0-5.0 | For fully non-magnetic austenitic steel, suitable for welding stainless steel with carbon steel, high manganese steel undercoat welding, and difficult-to-weld areas. | ||
MIG-308 | JGS-308 | ER308 | ER308 | 1.0-5.0 | Excellent welding performance and crack resistance, suitable for welding AISI 304 (1Cr18Ni9) |
MIG-308L | JGS-308L | ER308L | ER308L | 1.0-5.0 | Excellent weldability and crack resistance, low carbon content for better corrosion resistance, suitable for welding AISI 304L (0Cr18Ni9) |
MIG-308LSi | JGS-308LSi | ER308LSi | ER308LSi | 1.0-5.0 | Weldability, molten iron fluidity, and weld bead formation are superior to ER308L. |
MIG-308H | JGS-308H | ER308H | ER308H | 1.0-5.0 | Good high-temperature strength and crack resistance, suitable for welding carbon-rich steel AISI 304H (1Cr18Ni9). |
MIG-309 | JGS-309 | ER309 | ER309 | 1.0-5.0 | Excellent crack resistance and antioxidant properties, suitable for welding with similar types of stainless steel, special-shaped steel, high-chromium steel, high-manganese steel, etc. |
MIG-309L | JGS-309L | ER309L | ER309L | 1.0-5.0 | Excellent crack resistance and antioxidant properties, suitable for welding with similar types of stainless steel, special-shaped steel, high-chromium steel, high-manganese steel, etc. |
MIG-309LSi | JGS-309LSi | ER309LSi | ER309LSi | 1.0-5.0 | Weldability, iron fluidity, and weld bead formation are superior to ER309L. |
MIG-309Mo | JGS-309Mo | ER309Mo | ER309Mo | 1.0-5.0 | Crack resistance, oxidation resistance, corrosion resistance, and higher-temperature strength are superior to ER309. |
MIG-310 | JGS-310 | ER310 | ER310 | 1.0-5.0 | At 900-1000°C, excellent antioxidant properties and high-temperature strength are achieved. |
MIG-312 | JGS-312 | ER312 | ER312 | 1.0-5.0 | Crack resistance, suitable for cover layer and difficult welding areas of shaped steel and for hard alloy steel welding |
MIG-316 | JGS-316 | ER316 | ER316 | 1.0-5.0 | Acetic acid, sulfurous acid, phosphoric acid, and salts exhibit excellent corrosion resistance, making them suitable for welding AISI 316 (0Cr18Ni12Mo2). |
MIG-316H | JGS-316H | ER316H | ER316H | 1.0-5.0 | Acetic acid, sulfites, phosphates, and salts exhibit excellent corrosion resistance, making them suitable for welding AISI 316H (0Cr18Ni12Mo2). |
MIG-316L | JGS-316L | ER316L | ER316L | 1.0-5.0 | Acetic acid, sulfurous acid, phosphoric acid, and salts exhibit excellent corrosion resistance, making them suitable for welding AISI 316L (0Cr18Ni12Mo2). |
MIG-316LSi | JGS-316LSi | ER316LSi | ER316LSi | 1.0-5.0 | Weldability, iron fluidity, and bead formation superior to ER316L |
MIG-317 | JGS-317 | ER317 | ER317 | 1.0-5.0 | Excellent corrosion and heat resistance, excellent in preventing grain boundary corrosion and embrittlement, suitable for welding of important chemical containers. |
MIG-317L | JGS-317L | ER317L | ER317L | 1.0-5.0 | Excellent corrosion and heat resistance, excellent in preventing grain boundary corrosion and embrittlement, suitable for welding on important chemical containers. |
MIG-347 | JGS-347 | ER347 | ER347 | 1.0-5.0 | Excellent resistance to grain boundary corrosion and higher temperature strength than ER308, suitable for welding AISI 347, 321, 304L |
MIG-347H | JGS-347H | ER347H | ER347H | 1.0-5.0 | Excellent resistance to grain boundary corrosion and higher temperature strength than ER308, suitable for welding AISI 347, 321, 304L. |
MIG-630 | JGS-630 | ER630 | ER630 | 1.0-5.0 | Welding of precipitation-hardened stainless steel and 17-4PH steel, suitable for corrosion-resistant wear-resistant applications. |
MIG-2209 | JGS-2209 | ER2209 | ER2209 | 1.0-5.0 | Excellent resistance to pitting and stress corrosion, suitable for welding 22Cr duplex stainless steel, such as UNS S31803 (2205) |
MIG-2553 | JGS-2553 | ER2553 | ER2553 | 1.0-5.0 | Excellent resistance to pitting and stress corrosion, suitable for welding 25Cr duplex stainless steel, such as UNS S31803 (2205) |
MIG-410 | JGS-410 | ER410 | ER410 | 1.0-5.0 | High-temperature oxidation resistance, excellent corrosion resistance, suitable for welding 410, 420 series stainless steel plates |
MIG-430 | JGS-430 | ER430 | ER430 | 1.0-5.0 | Structural 17Cr stainless steel suitable for welding and resistant to nitric acid corrosion and heat. |
Lincoln Product Name | Comparable specifications | Specs | Primary Use | |
MIG | TIG | |||
Gas Welding Filler Metal | Tungsten Electrode Argon Arc Welding | |||
MIG-307LSi | KTS-307LSi | H09Cr21Ni9Mn4Mo | 0.8-5.0 | Weldability, molten iron fluidity, and bead formation are superior in ER307. |
MIG-307HM | KTS-307HM | 0.8-5.0 | For fully non-magnetic austenitic steel, suitable for welding stainless steel with carbon steel, high manganese steel underlay welding, and difficult-to-weld areas. | |
MIG-308 | KTS-308 | H0Cr21Ni10 | 0.8-5.0 | Excellent weldability and crack resistance, suitable for welding AISI 304 (1Cr18Ni9). |
MIG-308L | KTS-308L(Si) | H00Cr21Ni10 | 0.8-5.0 | Excellent weldability and crack resistance, low carbon content with better corrosion resistance, suitable for welding AISI 304 (0Cr18Ni9). |
MIG-308LSi | KTS-308LSi | 0.8-5.0 | Weldability, molten iron fluidity, and shaping are superior to ER308L. | |
MIG-308H | KTS-308H | 0.8-5.0 | The weld has excellent high-temperature strength and crack resistance, suitable for welding high-carbon steel 304 (1Cr18Ni9). | |
MIG-309 | KTS-309 | H1Cr24Ni13 | 0.8-5.0 | Excellent crack resistance and antioxidant properties, suitable for welding with similar types of stainless steel, different steel grades, high-chromium steel, high-manganese steel, etc. |
MIG-309L | KTS-309L | H0Cr24Ni13 | 0.8-5.0 | Excellent crack resistance and antioxidant properties, suitable for welding with similar types of stainless steel, different steel grades, high-chromium steel, high-manganese steel, and more. |
MIG-309LSi | KTS-309LSi | 0.8-5.0 | Welding operability, iron fluidity, and bead formation are superior to ER309L. | |
MIG-309MoL | KTS-309MoL | H03Cr24Ni13Mo2 | 0.8-5.0 | Excellent crack resistance, oxidation resistance, corrosion resistance, and high-temperature strength compared to ER-309. |
MIG-310 | KTS-310 | H1Cr26Ni21 | 0.8-5.0 | Excellent oxidation resistance and high-temperature strength at 900℃-1000℃. |
MIG-312 | KTS-312 | H15Cr30Ni9 | 0.8-5.0 | Crack resistance, suitable for overlay layers and difficult welding areas of dissimilar steel, as well as for welding hardening alloys. |
MIG-316 | KTS-316 | H1Cr19Ni12Mo2 | 0.8-5.0 | Acetic acid, sulfurous acid, phosphoric acid, and salts exhibit excellent corrosion resistance and are suitable for welding AISI 316 (0Cr18Ni12Mo2). |
MIG-316H | KTS-316H | 0.8-5.0 | Acetic acid, sulfurous acid, phosphoric acid, and salts exhibit excellent corrosion resistance, making them suitable for welding AISI 316H (0Cr18Ni12Mo2). | |
MIG-316L | KTS-316L | H0Cr19Ni12Mo2 | 0.8-5.0 | Acetic acid, sulfurous acid, phosphoric acid, and salts offer excellent corrosion resistance and are suitable for welding AISI 316L (0Cr18Ni12Mo2). |
MIG-316LSi | KTS-316LSi | 0.8-5.0 | Weldability, iron fluidity, and bead formation are superior to ER316L. | |
MIG-317 | KTS-317 | H1Cr20Ni14Mo3 | 0.8-5.0 | Excellent corrosion and heat resistance, with superior effectiveness in preventing grain boundary corrosion and embrittlement, suitable for welding of critical chemical containers. |
MIG-317L | KTS-317L | H0Cr20Ni14Mo3 | 0.8-5.0 | Excellent corrosion and heat resistance, with superior effectiveness in preventing grain boundary corrosion and embrittlement, suitable for welding on critical chemical containers. |
MIG-347 | KTS-347 | H0Cr20Ni10b | 0.8-5.0 | Excellent resistance to grain boundary corrosion and higher temperature strength than ER308, suitable for welding AISI 347, 321, 304L. |
MIG-347H | KTS-347H | 0.8-5.0 | Excellent resistance to grain boundary corrosion and higher temperature strength than ER308, suitable for welding AISI 347, 321, and 304L. | |
MIG-630 | KTS-630 | H05Cr17Ni4Cu4Nb | 0.8-5.0 | Welding of precipitation-hardened stainless steel and 17-4PH steel, suitable for wear-resistant applications. |
MIG-2209 | KTS-2209 | H03Cr22Ni8Mo3N | 0.8-5.0 | Excellent resistance to pitting and stress corrosion, suitable for welding 22% Cr duplex stainless steel, such as UNS S31803 (2205). |
MIG-2553 | KTS-2553 | 0.8-5.0 | Excellent resistance to pitting and stress corrosion, suitable for welding 22% Cr duplex stainless steels such as UNS S32550 (2553). | |
MIG-410 | KTS-410 | H12Cr13 | 0.8-5.0 | Excellent high-temperature oxidation and corrosion resistance, suitable for welding 410, 420 series stainless steel plates. |
MIG-430 | KTS-430 | H10Cr17 | 0.8-5.0 | Structures suitable for welding 17% Cr stainless steel resistant to nitric acid corrosion and heat. |
