Application Fields：

JDSSeriesMechanical Sand Mixing Wetting MachineIs a matching equipment for wet mixing and water addition systems in industries such as sand making, mining, building materials, and mixing stations.

Applicable Material

Mechanically crushed sand, dry sand, sand and stone, slag, etc.

Technical Features:

(1)Ensures finished sand is free of dust contamination.

(2)The sand particles do not disperse.

(3)Uniform moisture content, surface dry and saturated, meeting the requirements of concrete companies.

(4)    Sealed structure design ensures dust-free material intake and discharge, meeting environmental protection standards.

(5)     The water inlet system is equipped with adjustable valves, allowing for convenient adjustment of water supply based on the required moisture content of the material.

(6)     Materials roll inside the drum under the influence of gravity, friction, and centrifugal force, achieving uniform mixing with water.

(7)     Material and roller have no relative motion, thus no wear on rotating or fixed parts, resulting in a long service life for the entire machine.

(8)     Simple structure and low maintenance effort, suitable for continuous production operations.

(9)     Utilizing variable frequency control, the equipment's speed can be reasonably adjusted, achieving both wetting effect and energy conservation.

Product Overview

JDS SeriesMechanical Sand Mixing Wetting MachineComprised of four main parts: even feeding, cylinder conveying, mixing and rotating to add moisture, and a reducer, it is also equipped with a reducer and a water supply system. The entire unit is mounted on a base, with the cylinder supported by the base and a bracket. Through the reducer, the cylinder rotates during operation, ensuring even mixing of the sand powder. Sufficient space inside the cylinder completely eliminates clogging and jamming, reducing downtime for cleaning and improving work efficiency. Water supply is controlled by a valve assembly.

New-style production linePKTraditional Production Line:

The sand production line is divided into two methods: dry and wet processing. Among them, dry processing for full-mechanical sand is the future development trend.

Now, almost all dry lines directly transport finished sand to the finished sand yard.

There are also some dry wire rods that are moistened by spraying water onto the belt conveyor during the discharge of finished sand, but all of them have the following shortcomings:

(1) Dust pollution present.

(2) Sand separation, with uneven mixing of particles of different sizes.

(3) Insufficient or uneven moisture content.

So, incorporate a stage into the dry production process.Mechanical sand mixed with moistureEquipment is the solution to the aforementioned issues.

Specification Model & Technical Performance:

Note: Parameters may change without prior notice; actual data is based on the physical product..