Aluminum Window and Door CNC Angle Coding Multi-Rib Cutting Saw LJZ-CNC-500×600 Equipment Performance:

◆ The cutting function for aluminum angle codes for aluminum profiles allows for multiple cuts, up to 9 pieces in one operation.

◆ Fully CNC model with an operator's console featuring a human-machine interface display; uses ball screw servo motors for feeding, the system controls the cutting length for precise dimensions. Manual operation requires only one-time installation of the profile, with all processing processes automatically completed by the machine.

◆The system controls the cutting quantity, allowing you to set the desired quantity for cutting. After the set quantity is reached, the machine automatically stops and awaits the next set of instructions.

◆Guided clamping device, ensuring no sharp remnants during the cutting of 3mm long angle connectors

◆ Imported hard alloy saw blades, with high-precision spindle as the machine main shaft

◆ Imported linear ball bearing motion pair, ensuring stable feeding precision

◆Hydraulic damping cylinders drive the cutting feed, the machine body features an integral structure with high rigidity.

◆Fully cut angle pieces automatically fall into pre-set containers, separated from the shavings.

Technical Specifications:

Cutting surface perpendicularity: ≤0.10mm

Cutting surface flatness: ≤0.10mm

Cutting surface roughness: Ra12.5μm

Cutting width: 240mm Cutting height: 140mm

Power: 380V 50Hz (3-phase 4-wire system)

Saw Blade Specifications: Φ500×Φ30×4.4×Z120mm

RPM: 3100

Saw Blade Feeding Speed: 0-3 m/min

Automatic Feeding Length: 0-500mm

Sawing Length: No limit when selecting manual

Working Pressure: 0.5-0.8 MPa

Gas consumption; 60/min

Dimensions: (Length x Width x Height) 1500mm x 1100mm x 1600mm

Weight: 850 kg