High-efficiency Aluminum Extrusion End Face Milling Machine (5-knife cutting type) LDX5Z-300 Equipment Performance:

◆Used for face milling of various center stiles for aluminum windows, doors, and curtain walls.

◆ Heavy-duty fixed workbench, sliding type, with a large stroke, capable of processing 6 to 10 profiles in one operation.

◆ Equipped with five cutting blades, including one vertical milling cutter and four horizontal milling cutters. All blades can be adjusted up, down, forward, and backward without changing tools, enabling the machining of various profiles. The reinforced center support allows for a single pass cutting, significantly enhancing work efficiency.

◆Based on different profiles, multiple knives can operate simultaneously or individually. Larger knife diameters ensure better quality of the machined surfaces.

◆ Can perform inclined face milling; a set of cutters can be adjusted at will between ±45°.

◆Hydraulic damping cylinders propel the tool feed, ensuring smoother operation.

Thickened profile press plates, to prevent profile deformation.

Technical Specifications:

Power: 380V 50Hz (3-phase 4-wire system) Power Rating: 2.2Kw x 4

Speed: 2800 rpm Operating Pressure: 0.5-0.8 Mpa

Milling Tool Diameter: Φ250mm Φ300mm  Motor Adjustment Stroke: 0-85mm

Dimensions: (Length × Width × Height) 2400mm × 1480mm × 1650mm Weight: 2000 Kg