Touchscreen-Controlled Vacuum Melting Furnace Equipment Application
1. Melting and processing of metal materials such as stainless steel, nickel-based alloys, copper, alloy steel, nickel-cobalt alloys, rare earth neodymium iron boron, etc., under vacuum or protective atmosphere conditions
2. Vacuum Refining Treatment for Alloy Steel
3. High-temperature sintering of non-metallic materials
4. Welding of Ceramic Materials and Metal Materials
5. Sintering and graphitization of carbon materials, PI film graphitization, thermal conductivity material graphitization, sintering of carbon fiber ropes, and graphitization of carbon fiber filaments
6. Directional solidification casting of materials, zone refining, crystal growth, etc.
Touchscreen-Controlled Vacuum Melting Furnace Product Features
1. Fast melting speed, sample testing can be completed within 10 minutes
Wide temperature range: 500-1700, 800-2000, 1000-2400℃
3. Equipped with a tilting device, molten samples can be poured into pre-prepared ingot molds, casting the desired sample shape.
4. Melting available under various atmosphere conditions: vacuum, vacuum + atmosphere, protective atmosphere.
5. Equipped with an operational simulation screen, allowing for a direct observation of the operation process of each component, as well as the intuitive display of their operational status.
Equipped with infrared temperature measurement. Temperature can be displayed in real-time.
7. Full stainless steel structure with water cooling, ensuring the shell temperature remains below 35°C, for your personal safety protection.
Wide Application Range: Suitable for the preparation of metal alloys, remelting of cast iron, smelting and sintering of non-metallic materials, graphitization and sintering of high-temperature materials, etc.
9. Configured with a touch screen and PLC control mode, it offers real-time display, recording, and saving functions for data such as temperature, vacuum, and current.
III. Main Technical Parameters
3.1 Equipment Sensing Power Supply: 15KVA, 30-80Hz
3.2 Power Voltage: 380V, 3-phase, 50Hz
3.3 Design Temperature: 2000℃ Infrared Temperature Measurement
3.4 Configured with programmable instruments for temperature measurement and control, it also allows for manual power real-time adjustment and can switch between usage modes.
3.5 crucible capacity: 50-500g (with iron density of 7.8g/cm³). Coils and crucible sleeves are freely interchangeable, with easy disassembly.
3.6 Coil Configuration: 3 coils - 50-200g, 1 piece; 200-500g, 2 pieces.
3.7 Crucible Configuration: Graphite crucible, Ceramic crucible, Yttria crucible (as required)
3.8 Ultimate Vacuum: 6.67×10E-3 Pa, upgradeable to high vacuum system
3.9 Protective Atmosphere: Nitrogen, Argon ≤ 0.05 MPa
3.10 Dimensions: 1550×1150×1650mm (L×W×H)
3.11 Total Equipment Weight: Approx. 800 Kg
3.12 Available for custom orders, featuring mechanical stirring, ultrasonic stirring, mold heating, and various other functions.
