RNSeries J Rack and Pinion Elevator:1. It is a basic split-type model; specifications include RNJ10-RNJ50, available in 3 specifications depending on the direction of the output shaft. 2, driven by a cylinder, no self-reduction, capable of movement.
RJ-4S Series Gear Rack Lift:1. It is the basic combination model; specifications include RNJ10-4S to RNJ50-4S, customizable for size and stroke as required. 2, capable of handling heavy loads.
RJ-4SB Series Rack and Pinion Lift 1, the gearbox is installed on the drive shaft of the RJ-4S series, allowing direct connection to the motor. 2, Suitable for cleanroom environments when not using gears or sprockets.
1. RJ4SH Series Rack and Pinion Lift 1, equipped with a turbine reducer on the drive shaft of the RJ-4S series, can be directly connected to the motor. 2, The turbine reducer features a reduction ratio, making it adaptable to general motors or servo motors.
1. Operating Principle：By means of the coordinated action between the gears and racks, ensure simultaneous lifting and lowering of four or more support points, thereby achieving smooth lifting and lowering of the work platform. The simultaneous error of the four support points can reach0.5mm
2. Synchronous Elevator Structure and Performance：① The synchronous lifter is a structure composed of a gear box with gears and racks, combined with a connecting shaft, designed for synchronizing the upper and lower surfaces during lifting or lowering operations. ② The gears inside the gear box mesh and operate together, resulting in almost no noise. ③ The up/down movement can still operate normally when receiving less than 50% bias pressure. ④ Its guide rail is composed in unit form, featuring standardized components. The lifter is a passive type, powered by a cylinder, which serves as a guide and synchronization mechanism.
1. Features of the synchronous lifter：① Genuine quality and simplified design; compact parts, strong durability, customizable assembly according to designer's requirements, reducing design time. ② Selection of model; when choosing the model, consider different loads, strokes, and series for varied specifications. ③ Selection of shaft spacing: pay attention to adding an intermediate support when the shaft spacing exceeds the corresponding length. ④ Smooth and quiet rotation with the up/down action; the gear and rack structure ensures engagement, maintaining synchronization even in harsh environments.
2. Wide Range of Applications：Suited for assembly lines on automated production or logistics systems Automated Warehouse Automated photovoltaic production line Awaiting general industrial machinery equipment
SNP Rack and Pinion LiftFeatures:
High-quality and simplified design, compact parts with strong durability, requiring only regular lubrication.
The structure of the gears and racks ensures proper meshing, maintaining synchronization even in harsh environments.
Operates smoothly, low noise, wide range of applications
For assembly line operations, logistics lines, automated warehouses, and general industrial machinery equipment.
*SNP-POWER baSuperior quality and unique structure, suitable for use in dust-free environments.
SNPRack and pinion liftPerformance:
*SNP-POWER baThe SE is a structure composed of a gear box with gears and racks combined with a connecting shaft, serving as a unit to maintain synchronous movement of the upper and lower surfaces during up and down operations.
The internal gears of the gearbox mesh together and operate, thus producing almost no noise.
*It operates normally even under 50% bias pressure during up and down movement.
Its guide rails are composed in unit form, which allows for quick replacement of components and easy maintenance due to standardized specifications.
