Product Introduction

When the equipment is operated incorrectly, small flames may occur. This instrument simulates small flames through needle flames to assess the risk of fire. This instrument adopts an original imported integrated chassis, and the control device is located outside the box, which is convenient to operate and will not leak smoke.

Product Parameters

Complies with the requirements of the new version of IEC 60695-11-5

Test box:

■ Original imported integrated box body

Internal combustion chamber ≥ 0.5 cubic meters

The inner surface of the box is dark in color

Internal illumination less than 20Lx

Burner tube:

■ Length ≥ 35mm

■ Inner diameter 0.5 mm ± 0.1 mm

■ Outer diameter ≤ 0.9 mm

Flame temperature rise time: flame rises from 100 ℃ to 700 ℃ time: 23.5 s ± 1 s

Test flame height: adjustable, with a 12mm gauge

Adjustable burner angle: 0 º, 45 º

Temperature calibration copper block: diameter of 4mm ± 0.01mm, mass of 0.58g ± 0.01g, equipped with imported K-type armored thermocouple, in compliance with IEC60584, diameter of 0.5mm, length of 300mm, temperature up to 1050 ℃; Temperature and time recording device: capable of measuring the heating time of copper blocks from 100 ℃ to 700 ℃, with a timing device resolution of 0.1s

Standard Accessories

Pine wood board and silk paper

Flame calibration copper block (with armored thermocouple) flame height gauge

Sample fixture: Soft material fixture

Choose accessories

Gas butane 4L steel cylinder with purity ≥ 99%, including pressure reducing valve

Timing control system:

Electric movement, move the flame to the sample position, set the flame application time, and record the residual flame time

There is a device for measuring the temperature and pressure of the surrounding air