Product Introduction
Manufactured according to IEC 60529 standard Figure 5, for IPX3 and IPX4 testing, with test box and swing tube diameter of φ 1200 mm
Product Parameters
Equipped with a sample turntable. The IP protection level IPX4K test can be increased to comply with ISO 26053 and DIN40050 standards for IPX5, IPX6, and 9K. The main structure of the equipment meets standards such as IEC 60529- IEC 60068-2-18- ISO 26053- DIN 40050-1 and is made of stainless steel material.
The test chamber adopts anodized aluminum profiles and a transparent organic glass sealing plate on the surface.
Waterproof box door with safety micro switch.
Stainless steel swing tube is replaceable and equipped with a replaceable nozzle. The nozzle hole diameter is 0.4 mm, and the protection level is IPX4 (nozzle spacing is 50mm). A set of plugs that cover IPx3 nozzles
Swing angle: ± 60 ° and ± 175 ° (adjustable)
Swing speed: 60 °/second. adjustable
The diameter of the electric turntable is 280 mm and the height can be adjusted,
Rotation speed: 1r/min.
Choose accessories
1. Waterproof power socket/plug V.230-A 16-2P+G version for supplying power to the sample
2. Add circulating water versions for water pumps and recycling tanks
3. Version with IPX4K degree test cycle and circulating water:
■ Adjustable nozzle with a hole diameter of 0.8 mm
The turntable speed can be adjusted from 1r/min to 4r/min per minute through a frequency converter
4. Version with IPX1-IPX2 drip test, adding:
Stainless steel drip tray, nylon drip nozzle, aperture 0.4 mm - effective size 600600mm with lid.
There are two water pipes of different heights inside the drip tray to maintain the flow of drip water:
■ IPX1 rating=1+0.5 mm/min.
■ IPX2 rating=3+0.5 mm/min.
The stainless steel turntable can be tilted 15 ° for IPX2 testing
5. Version with IPX5-IPX6 water spray test device, add:
The protective channel adopts an anodized aluminum profile frame, and the sealing plate is made of transparent machine glass
IPX5 and IPX6 nozzles are replaceable. The aperture sizes are 6.3mm and 12.5mm respectively
■ Adjustable nozzle bracket, located 2800 mm from the center of the turntable
