Mobile Grab Bucket Cleaning Machines are primarily used for removing large floating debris from water, such as trees, weeds, garbage, fibers, rubber and plastic materials, etc. The grille cleaning machine is suitable for the inlets and outlets of large and medium-sized structures, such as flood prevention pumping stations, sewage and rainwater lifting pumping stations, hydropower and thermal power plant intake outlets, and wastewater treatment plants, to ensure unobstructed water intake and protect the pump impeller. It reduces the workload of subsequent process treatment, making it an ideal economic choice product. The Gate-type Mobile Grab Bucket Cleaning Machine mainly consists of four parts: the grab device, the gantry crane, the guide rail, and the underwater grille. The grab device is composed of two grab buckets, made of stainless steel, with an articulated hinge in the middle, connected to the top with an engineering cylinder, allowing the grab to close when oil is applied. The cleaning section includes a lifting device composed of steel cables, drums, and a motor reducer, as well as an oil tank and telescopic oil pipe drum, among other components. The traveling guide rail consists of rectangular long guide rails and arrays of support columns for suspended installation. The gantry crane is mainly composed of the gantry frame, the walking end beam, and the walking mechanism. Key Features: The Gate-type Mobile Grab Bucket Cleaning Machine breaks away from traditional coarse grille design and incorporates many new technologies. The equipment is mainly composed of the gantry crane and the grab device, with one machine capable of serving multiple grilles. The crane guide rail is equipped with limit sensors, allowing the crane to accurately stop at each cleaning point. The unique design of the cleaning mechanism allows the grab to tightly mesh with the grille bars during cleaning, thus removing hair-like debris and entanglements around the grille. The track spans across the intake outlet, making the grille platform extremely clean. All control cables are also laid out along it, resulting in a very clean overall appearance. The lifting and lowering of the grab does not require any track devices, thus reducing energy loss due to friction. Due to the high electrical control level and the simple mechanical structure, the equipment has high stability, easy maintenance, and low maintenance volume. The wastewater grab buckets use a back net structure, which, while intercepting many large pollutants, also removes fine suspended particles, significantly reducing the workload of the subsequent fine grille. Product Advantages: Due to the unique structure and the latest technology of the Gate-type Mobile Grab Bucket Cleaning Machine, it has the following advantages: - High adaptability: Suitable for any complex water quality, capable of handling various large debris, extensive aquatic weeds, and other debris. - Large processing capacity: The grab has a large capacity, capable of picking up hundreds of kilograms of various garbage each time. - Wide working area: One machine can clean multiple grilles, removing the grille from top to bottom. - Large grab depth: Can reach up to 75 meters deep, with no limit on width. - Good structural performance: The grab runs up and down without guide rails, friction-free, and with low energy consumption. - High degree of automation: The entire process is fully automated through a PLC touch screen, achieving unattended operation. - Long service life: No permanent immersion parts, no friction, few faults, and low maintenance volume. - Good working environment: Garbage is directly placed in the discharge area, without the need for conveying equipment, an open platform, clean and tidy. - Low civil engineering investment: Can adapt to various sites and spaces, with low civil engineering requirements and low cost. - Good cost-performance ratio: One machine can replace several traditional grille cleaning machines.