详情描述

The Hot-Cleaning Furnace is a new specialized equipment designed for cleaning coatings off returned parts and fixtures on paint lines, widely used in industries such as air conditioners, refrigerators, microwaves, electric fans, computers, and other household appliances, as well as motorcycles, bicycles, cars, steel furniture, telecommunications, and power transmission and transformation. Its comprehensive performance meets standard levels. This equipment boasts excellent environmental protection features and high economic benefits; its SO2 and NO emissions are only 1/10 of the national standard, and its operational cost is merely 1/8 of paint strippers.

 

I. Product Application

Remove the continuously thickening coating from the spray fixtures and clamps without altering the mechanical properties of the fixtures.

2. Complete and thorough removal of non-compliant paint or powder coating from the surface of metal components, without any damage to the workpiece.

3. Clean the paint layer adhered to the filter mesh and fan impeller of the water curtain cabinet.

4. Clean and remove winding and adhered organic matter from wires, cables, transformers, motors, and printing rollers.

5. Clean and remove oils, greases, and other organic matter from components such as the engine, crankshaft, housing, piston rings, etc.

 

II. Specifications and Data

Cabinet: Heavy-duty steel plate steel structure, supported by square steel and channel steel. Full welding and sealed contact prevent fuel loss due to leakage.

Floor: Rigid refractory castable, 4"-5" (10-13cm) thick, reinforced with steel I-beams. Easy to clean off ash.

Door: Equipped with a snap-locking mechanism and high-strength sealing strips. The door can be opened over 180 degrees, ensuring safety and reliability with ease of use and durability.

Explosion-proof: The unique gravity-sealed top automatically releases excess pressure, then closes to prevent air from contacting combustible materials.

Adjacent Insulation: The furnace wall, roof, and door are covered with (10-15cm) 2-3 layers of lightweight ceramic fiber blanket insulation. Secured with stainless steel pins, stainless steel mesh plates, and locking washers without asbestos. Metal bushes prevent mechanical injury to the operator from the insulating panels. Cleanable furnace insulation rating up to 2300F (1275°C).

Exhaust:natural gas(Gas pressure requirement: 5-8 KPa), or light diesel.

Power Supply: 220-250V, 50Hz, Single Phase, 5-10A

Water Supply: Minimum pressure 40 psi, maximum pressure 100 psi. Minimum flow rate 5 gpm (15 liters/minute).

Normal Cycle: 3-5 hours (including cooling time) with automatic control.

Normal Circulating Temperature: 750-800°F (400-430°C)

Pollution Standards: Compliant with new environmental protection standards.

Safety and Health Standards: Compliant with new OSHA standards. Meets NFPA 86 requirements.

Insurance Standards: Compliant with most national and local regulations.

Corrosion-Resistant Steam Barrier: Prevents corrosive steam from condensing in the furnace. Significantly extends the lifespan of the blast furnace.

Combustion Chamber Protection: Heavy-duty steel guardrails are installed around the upper and lower combustion chambers to prevent accidental or careless collisions.

Multiple models of trolleys: Various models of trolleys are available to meet your diverse load requirements (standard containers).

Gas burner: Designed specifically for incinerators. Features include an advanced clog-free nozzle design, easy maintenance, and heavy-duty construction. The burner's automatic cooling system prevents nozzle damage.